User manual JVC AV-21QT5BJ

[. . . ] ENGLISH AV-21QT5BJ AV-21QT5SJ COLOUR TELEVISION INSTRUCTIONS 50084579 2006 Victor Company of Japan, Limited 0406TKH-VT-VT Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 TV Buttons and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Then enter the Installation menu by pressing or button. 0(18 PAA 3, &785( 6281' )($785( , 167$//$7, 21 352*5$00( DITU6GG6UDPI QSPBS6HH@ 76I9 8C6II@G 8PGPVST`TU@H 9@8P9@S@YU!Q6G Sleep Timer As you enter the Feature menu, Sleep Timer will be the first selected option. Use or button to change the Sleep Timer values between OFF, 10, 20, 30, . . . . . . , 110 and 120. If sleep timer is activated, at the end of the selected time, the TV goes automatically to stand-by mode. You can also set the Sleep Timer by pressing the Yellow button directly. Child Lock You can use this feature to prevent children turning the TV on or changing programs or adjustments etc. The Child Lock feature can be set by or button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Power On/Off button) will not work. If Child Lock is ON, when one of the front panel buttons (except power button) is pressed, CHILD LOCK OSD is seen on the screen. Selecting Programme To select programme number, you can use or Digit Buttons. or button Selecting Band BAND, can be selected either C or S by pressing button. or Selecting Channel CHANNEL can be changed by or tons. For band S, 01 - 41, for all channel tables. button or Digit But- Selecting Country Using Press tings. button to select the desired country set- Selecting Language Menu language can be selected by pressing ton on Language item. or but- -8- Selecting Colour System Using or button on Colour System, you can change the colour system to PAL or AUTO. Note: In EXT mode, you can choose NTSC 3. 58 and NTSC 4. 43 as well. Selecting Decoder (EXT2) You can use this mode to connect any decoder to your TV. Press the or buttons to turn it on or off. When you turn Decoder on, EXT-2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT-2 output. Decoder setting should be stored separately for each programme. Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy with the image on the screen. Use or button on FINE TUNING item, until getting the best image on the screen. In Channel option, normally the Fine Tuning cursor is placed at the middle on the slider, and this is indicated with two reciprocal arrows. Selecting Search Using or button select Search item. [. . . ] In such a case, disconnect one of the peripherals. No Image on Display Screen Is the aerial connected properly?Are the plugs connected tightly to the aerial socket?Are suitable plugs used to connect the aerial?If you are in doubt, consult your dealer. [. . . ]