User manual JVC AV-24F702

[. . . ] ® For model: AV-24F702 COLOR TELEVISION USER'S GUIDE TV CATV VCR DVD POWER STANDARD INPUT 1 BBE DISPLAY 2 5 8 0 3 6 9 RETURN 4 7 SLEEP TIMER C. C. RM-C309G AUDIO SELECT LIGHT MUTING ENTER CH VOL CH MENU ­ VCR CHANNEL + PREV NEXT VOL EXIT VCR/DVD POWER TV/VCR REW PLAY FF REC OPEN/CLOSE STOP PAUSE STILL/PAUSE POWER TV IMPORTANT NOTE TO THE CUSTOMER: In the space below, enter the serial number for your television (located on the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. Serial Number The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] To connect the TV to a camcorder To playback from the camcorder, connect the camcorder to the TV as shown. OUT VCR Front of TV VIDEO 3 IN VIDEO L/MONO AUDIO R PB PR VIDEO 2 L/MONO AUDIO R VIDEO To Audio(L/R)/ Video OUT AUDIO (L) AUDIO (R) (not supplied) VIDEO 1 To Audio(L/R)/ Video OUT (not supplied) AUDIO (R) · Select "VIDEO 1" by pressing the INPUT button to display the VCR picture. · Select "VIDEO 3" by pressing the INPUT button to display the camcorder picture. 2. To connect the TV to a VCR with an S-VIDEO jack If you connect a VCR with an S-video jack to the SVIDEO jack on the rear of TV, you must also connect the audio cables to the AUDIO IN (VIDEO 1) jacks on the rear of the TV. The S-video cable only carries the video signal. Audio signal is separate. Rear of TV IN Y ANT(75) VIDEO L/MONO VIDEO L/MONO AUDIO R 4. To connect the TV to a DVD with COMPONENT VIDEO OUT Jacks. If you connect a DVD with the COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN (Y, PB, PR) jacks on the rear of TV, you must also connect the audio cables to the AUDIO IN (VIDEO 2 IN) jacks on the rear of the TV. Rear of TV DVD AUDIO (L) IN Y VIDEO L/MONO AUDIO R VCR AUDIO (L) OUT OUT PB PR VIDEO 2 S-VIDEO AUDIO R VIDEO 1 VIDEO 2 VIDEO 1 S-VIDEO AUDIO (R) (Not supplied) (Not supplied) (Not supplied) AUDIO (R) (Not supplied) NOTE: When the S-video cable and the video cable are connected to each jack at the same time, the S-video cable takes precedence over the video cable. · Select "COMPONENT" by pressing the INPUT button to display the DVD picture. · If you have a DVD without COMPONENT VIDEO OUT jacks, connect the video cable to VIDEO IN (VIDEO 2 IN) jack. In this case, select "VIDEO 2" by pressing the INPUT button to display the DVD picture. 12 SETTING LANGUAGE This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or French. On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options. 1 2 Press the MENU button. Press the CH + (v) or ­ (w) button to select the LANGUAGE mode, then press the ENTER button. MENU CLOCK SET ON/OFF TIMER CH SET-UP PICTURE AUDIO LANGUAGE / IDIOMA / LANGUE V-CHIP SET v / w / ENTER / MENU / EXIT 3 Press the CH + (v) or ­ (w) button until the " " indicator points to the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button. LANGUAGE / IDIOMA / LANGUE v / w / ENTER / MENU / EXIT 4 Press the EXIT button. NOTE: If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text will not be affected by the language selection. SETTING CLOCK You must set the time manually for DISPLAY and ON/OFF TIMER. 1 2 Press the MENU button. 4 Press the CH + (v) or CH ­ (w) button to set the minute. CLOCK SET 10 : 00 AM Press the CH + (v) or CH ­ (w) button until the indicator next to "CLOCK SET" begins to flash, then Press the ENTER button. MENU CLOCK SET ON/OFF TIMER CH SET-UP PICTURE AUDIO LANGUAGE / IDIOMA / LANGUE V-CHIP SET v / w / ENTER / MENU / EXIT v/w/ / / ENTER / MENU/ EXIT 5 Press the EXIT button. 3 Press the CH + (v) or CH ­ (w) button to set the hour, then press the VOL + ( ) button. v/w/ / CLOCK SET 12 : 00 AM / ENTER / MENU/ EXIT NOTES: · After a power failure or disconnection of the power plug, the time display will be lost. · When you set the minute, you can change in 10minutes by holding down the CH + (v) or CH ­ (w) button. 13 TO MEMORIZE CHANNELS This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting. AUTOMATIC CHANNEL MEMORY 1 2 Press the MENU button. Press the CH + (v) or ­ (w) button until the indicator next to "CH SETUP" begins to flash, then press the ENTER button. Press the CH + (v) or ­ (w) button until the indicator next to "AUTO CH MEMORY" begins to flash, then press the ENTER button. The TV will begin memorizing all the channels available in your area. Press the EXIT button. MENU CLOCK SET ON/OFF TIMER CH SET-UP PICTURE AUDIO LANGUAGE / IDIOMA / LANGUE V-CHIP SET v / w / ENTER / MENU / EXIT TV/CATV SELECTION 3 MENU CLOCK SET ON/OFF TIMER CH SET-UP PICTURE AUDIO LANGUAGE / IDIOMA / LANGUE V-CHIP SET v / w / ENTER / MENU / EXIT 1 2 Press the MENU button. Press the CH + (v) or ­ (w) button until the indicator next to "CH SETUP" begins to flash, then press the ENTER button. Press the CH + (v) or ­ (w) button until the indicator next to "TV/CATV" begins to flash. [. . . ] · Set TV/CATV menu option to the CATV mode. · Station or CATV system problems, try another station. · Check antenna connections, reorient antenna. · Check for sources of possible interference. [. . . ]