User manual JVC AV-28CH1EU

[. . . ] Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Operate only from the power source specified (AC 220 ­ 240 V, 50 Hz) on the unit. Avoid improper installation and never position the unit where good ventilation is unattainable. [. . . ] The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT2 terminal. The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal. During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 terminal. ⷠWhen you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a device connected to the EXT terminal onto a VCR connected to the EXT-2 terminal. ⷠThe RGB signals from the TV games cannot be output. You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an external device. You can set the TV to automatically turn off after a specified period of time. When there is a TV channel you wish your children not to watch, you can use the CHILD LOCK function to lock out the TV channel. Even when a child chooses a Programme number (PR) in which a locked TV channel has been registered, the screen will change to blue and displays n (CHILD LOCK) so the TV channel cannot be viewed. Unless you enter a pre-set ID number by a special operation, the lock cannot be released and the child cannot view the TV channel programmes. You can set the period of time a maximum of 120 minutes (2 hours) in 10 minute increments. One minute before the SLEEP TIMER function turns off the TV, "GOOD NIGHT!The SLEEP TIMER function cannot be used to turn off the TV's main power. ⷠWhen the SLEEP TIMER function is on, you can display the Sub-menu of the SLEEP TIMER function again to confirm and/or change the remaining period of time of the SLEEP TIMER function. Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. Even if you reset the lock temporarily, it does not mean that the CHILD LOCK function set for the TV channel is cancelled. The next time anyone attempts to view the TV channel, it will be locked again. ⷠWhen you would like to cancel the CHILD LOCK function, you must perform the operation "To set the CHILD LOCK function" again. ⷠTo disable easy choosing of a Programme number (PR) in which a locked TV channel has been registered, the Programme number (PR) has been set that it cannot be chosen by the 6 buttons or the operation buttons at the TV. ⷠTo disable easy resetting of the lock, "ID NO. Input screen) is set so that it cannot appear unless you press the h (Information) button. [. . . ] Try to change the aerial's direction or replace the antenna with the one with better directionality. Follow the description "COLOUR SYSTEM" on page 16 to try to solve the trouble. Follow the description "Picture Adjustment" on page 15 to try to adjust them properly. When the SLEEP TIMER function operates, the TV is automatically turned off. [. . . ]