User manual JVC AV-28KM3

[. . . ] AV-21KM3BN AV-21KM3SN DEUTSCH ENGLISH FARBFERNSEHGERÄT VICTOR COMPANY OF JAPAN, LIMITED BEDIENUNGSANLEITUNG INSTRUCTIONS COLOUR TELEVISION 50049547 ©2004 VICTOR COMPANY OF JAPAN, LIMITED 0503-JVC Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Antenna Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use or button to change the value of the sleep timer between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. Your TV will get into standby mode when the period you selected passes after you make the selection. It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds. Install. Menu Press MENU button, now you are in main menu. In the or button, main menu, select INSTALL. using then enter the Installation menu pressing or button. or Enter the Installation Menu directly, pressing the BLUE button. ENGLISH - 21 - To programme a channel in a TVs programme number manually: 1. PROGRAMME will be the first selected item as you enter the INSTALL. Pressing or button select the programme number where you want to the tuned channel to be stored. (You may also type the programme number using the digit buttons. ) Program. (Programming) menu is used to display the programme names and numbers. You can use this menu to delete a channel, to insert a channel and to autostore the programmes. menu pressing ton and open it pressing or button. When you enter the programme menu, all the programme numbers and names will be displayed on the screen. The programme number and name of the tuned channel will be shown by the cyan color. All the other channel numbers will be white. You can move the number in cyan using or or or button. Also, it's possible to use digit buttons to select programme numbers. As you pass through the programme numbers this way, to reach the programme number you want, the channels corresponding to the programme numbers you pass through will be tuned and the selected programme number will be shown in cyan. 2. Using or button to select the band in which you want to search a channel. (Press button to search forward. Press button to search backwards. ) If the found channel is not the desired one, press or button to start searching again. [. . . ] Is the balance set to one direction extreme?See SOUND menu. Remote Control Your TV no longer responds to the remote control. Press the STANDARD button on the remote control once more. If so you can still use the local buttons at the front of your TV. [. . . ]