User manual JVC AV-28R25

[. . . ] Specifications Model AV32R25EK*/AV32R250EK* AV28R25EK*/AV28R250EK* Item Broadcasting systems CCIR I Colour systems PAL · The EXT terminals also support the NTSC 3. 58/4. 43 MHz system. Channels and frequencies E21-E69 Sound-multiplex systems NICAM (I) system Teletext systems FLOF (Fastext), WST (World Standard Text) Power requirements 220 - 240 V AC, 50 Hz Power consumption Maximum: 200 W, Average: 127 W, Maximum: 200 W, Average: 125 W, Standby: 3 W Standby: 3 W Picture tube size Viewable area 76 cm (measured Viewable area 66 cm (measured diagonally) diagonally) Audio output Rated Power output: 10 W + 10 W + 10 W, 18 W (woofer) Speakers (13 cm × 6. 5 cm) oval × 2, (16 cm × 4 cm) oval × 1, 13 cm round woofer ×1 EXT-1 terminal Euroconnector (21-pin, SCART) · Video input, Audio L/R inputs and RGB inputs are available. · TV broadcast outputs (Video and Audio L/R) are available. EXT-2 terminal Euroconnector (21-pin, SCART) · Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available. [. . . ] LEFT/CENTRE/RIGHT: You can adjust the sound level of each speaker separately. LEFT/RIGHT means left and right of the front speakers and CENTRE means the centre speaker. 23 Using the TV's menu Other surround functions You can enjoy enhanced sound with one of the following four surround functions: DANCE CLUB: This function creates a dance club atmosphere. It does not work properly for mono sound. CONCERT HALL: This function creates a concert hall atmosphere. It does not work properly for mono sound. STADIUM: This function creates a stadium atmosphere. It does not work properly for mono sound. HYPER SOUND: This function enhances mono sound to create a stereo sound feel. It does not work properly for stereo sound. To cancel the function: Press the 6 buttons to choose SURROUND OFF. · The above function does not work properly for Dolby Surround encoded programmes. Headphone surround Preparation: Before using a function in the HEADPHONE SURROUND menu, please be sure to connect the headphones to your TV. If the headphones are not connected to the TV, the DIGITAL SURROUND function becomes active instead of the HEADPHONE SURROUND function. · Disconnecting the headphones from the TV automatically changes to the DIGITAL SURROUND function corresponding to the current HEADPHONE SURROUND function. However, the 3D HEADPHONE function is changed over to either the PRO LOGIC 3D-PHONIC function or DOLBY PRO LOGIC function, depending on the state at that time. 3D HEADPHONE The 3D HEADPHONE function produces 3D surround effects that are heard through headphones, but should be more naturally placed, as if they were coming out of separate front speakers. Then press a button To cancel the 3D HEADPHONE function: Press the 6 buttons to choose SURROUND OFF. · You can turn the 3D HEADPHONE function on or off with a single press. · The 3D HEADPHONE function does not work properly for mono sound. · The 3D HEADPHONE function cannot play back Dolby Surround Pro Logic sound correctly. 24 Using the TV's menu Other surround functions You can enjoy enhanced sounds while using headphones with one of the following four surround functions: DANCE CLUB: This function creates a dance club atmosphere. It does not work properly for mono sound. CONCERT HALL: This function creates a concert hall atmosphere. It does not work properly for mono sound. STADIUM: This function creates a stadium atmosphere. [. . . ] · When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description "STEREO / I · II" on page 21 to hear the sound more easily by changing it to a mono sound. If the TV does not respond to the remote control · Have the batteries of the remote control worn out?Follow the description "Putting the batteries into the Remote control" on page 6 and replace them with new batteries. · Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? [. . . ]