User manual JVC AV-28RT4BU

[. . . ] Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 TV Buttons and Functions and Rear Panel . . . . . . . . . . 3 Antenna Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use or button to change the Sleep Timer values between OFF, 10, 20, 30, . . . . . . , 110 and 120. If sleep timer is activated, at the end of the selected time, the TV goes automatically to stand-by mode. You can also set the Sleep Timer by pressing the Yellow button directly. Child Lock You can use this feature to prevent children turning the TV on or changing programs or adjustments etc. The Child Lock feature can be set by or button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Power On/Off button) will not work. If Child Lock is ON, when one of the front panel buttons (except power button) is pressed, CHILD LOCK OSD is seen on the screen. Selecting Programme To select programme number, you can use or Digit Buttons. or button Selecting Band BAND, can be selected either C or S by pressing button. or Selecting Channel CHANNEL can be changed by or tons. For band S, 01 - 41, for all channel tables. button or Digit But- Selecting Country Using Press tings. button to select the desired country set- Selecting Language Menu language can be selected by pressing ton on Language item. or but- -8- Selecting Standard STANDARD can be selected BG, I, L or DK by pressing or button. !8!" "8#$ #8#& $8$ %8$$ & ' ( I6H@ 9@G@U@ !!" !# !$ !% !& !' !( " Selecting Colour System Using or button on Colour System, you can change the colour system to PAL, SECAM or AUTO. Note: In EXT mode, you can choose NTSC 3. 58 and NTSC 4. 43 as well. DIT@SU 6VUPTUPS@ Selecting Decoder (EXT2) You can use this mode to connect any decoder to your TV. Press the or buttons to turn it on or off. When you turn Decoder on, EXT-2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT-2 output. Decoder setting should be stored separately for each programme. Selecting Fine Tuning You can use the Fine Tuning process for fine adjustment (after coarse adjustment), if you are not happy with the image on the screen. Use or button on FINE TUNING item, until getting the best image on the screen. In Channel option, normally the Fine Tuning cursor is placed at the middle on the slider, and this is indicated with two reciprocal arrows. Selecting Search Using or button select Search item. [. . . ] Headphone jack Stereo mini-jack (3. 5 mm in diameter) Dimensions (WxHxD) 765 mm x 585 mm x 486 mm Accessories Remote control unit x 1 (RM-C1100) AA/R6 dry cell battery x 2 Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position. Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Colours of image on screen are abnormal Have you selected the correct TV system?Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc. Mountains or high buildings can cause double pictures or ghost images. [. . . ]