User manual JVC AV-32920

[. . . ] Illustration of AV-32920 and RM-C754 IMPORTANT NOTE TO THE CUSTOMER: In the space below, enter the serial number for your television. (The serial number is located on the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. [. . . ] The "Helping Hand" icon points to the highlighted or selected item in a menu. To use the Menu, press any of the remote's 4-way cursor control (MENU) buttons and JVC's transparent scrolling menu will appear on screen. The item that appears yellow is the selected item. NOTE: The menu screens depicted in this book are representations of the menu screens on your set. They are not exact replications. ------------------------------------------------------------------------------------------------------------------------NEXT PAGE BY BY EX EXIT BY IT PICTURE ADJUST PREVIOUS NOTCH NOISE MUTING SET VIDEO STATUS ON ON OFF OFF NEXT PAGE SELECT OPERATE BY BY EX EXIT BY IT SOUND ADJUST PREVIOUS BASS TREBLE BALANCE MTS ------------------------------------------------------------------------STEREO SAP MONO ON AIR NEXT PAGE SELECT OPERATE BY BY EX PLUG IN MENU LANGUAGE ENG FRE SPA AUTO TUNER SETUP SET CLOCK FINISH EXIT BY IT CLOCK/TIMERS PREVIOUS SET CLOCK ON/OFF TIMER SET LOCK CODE SELECT OPERATE BY BY EX NEXT PAGE SELECT OPERATE BY BY EX EXIT BY IT The "Plug In Menu" only appears immediately after the TV is plugged in, or after a power interruption of more than 90 seconds. EXIT BY IT INITIAL SETUP PREVIOUS AUTO TUNER SETUP CHANNEL SUMMARY INITIAL SETUP PREVIOUS TV SPEAKER ON OFF AUDIO OUT VARI FIX LANGUAGE ENG FRE SPA CLOSED CAPTION NEXT PAGE EX NEXT PAGE SELECT OPERATE BY BY EXIT BY IT SELECT OPERATE BY BY EX EXIT BY IT PLUG IN MENU 15 The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The Plug In Menu sets the default preferences for you for: Ì The Language in which you want the onscreen displays to appear. Ì The Auto Tuner Setup of channels to be included in scan. Ì The Tuner Mode the TV is set to -- Air or Cable. Ì The time of the TV's Clock. Once you have set your preferences in the Plug In Menu section, it will not appear again unless there is a power interruption. During Auto Tuner Setup, the TV will automatically scan through all available channels and memorize the active ones so that when you scan, you do not pick up weak or noisy channels. To AUTO TUNER SETUP To operate TUNER MODE CABLE START AIR NOTES: You can exit the Plug In Menu at any time by pressing the EXIT button on the remote control. You can enter the Plug In Menu any time by simultaneously pressing the MENU button and VOLUME "­" button on the TV's front panel. To choose CABLE or AIR To move to START To start Auto Tuner Setup NOW PROGRAMMING! Your JVC television allows you to choose from English, French, or Spanish on-screen menus and displays. To LANGUAGE LANGUAGE ENG FRE SPA 48 The Programming takes approximately 1 to 2 minutes PROGRAMMING OVER! To choose the language ENGLISH FRENCH SPANISH Note: You should perform the Auto Tuner Setup for both Cable and Air, if you have cable or a satellite system. Note: Noise Muting will not work while Auto Tuner Setup is working. 16 PLUG IN MENU Continued from below. . . NOTES: Remember, the Plug In Menu will only appear after you turn on the TV for the first time, or after a power interruption. The Clock is the heart of all timer functions. You must set the clock before the On/Off Timer will work. To SET CLOCK To operate TIME ­­:­­ ­­ START CLOCK TIME ­ ­:­ ­ ­ ­ START CLOCK If you choose NO, you will receive the following message: YOU CANNOT OPERATE ON/OFF TIMER ! To set the hour (AM/PM) To move to minutes To set the minutes To move to START CLOCK when done with settings To start the clock THANK YOU !If you want to synchronize the TV clock with another clock or time signal, press LEFT or RIGHT MENU arrow at the appropriate time, and the clock will start. Note: If you attempt to "Start Clock" without setting the time you will receive this message: INCORRECT TIME PLEASE TRY AGAIN Note: If the TV is unplugged or you experience a power outage, you must reset the clock for any timer functions to work. CLOCK SET MESSAGES: If you do not set the clock but attempt to use the On/Off Timer anyway, you will get the following message: POWER INTERRUPTED WOULD YOU SET CLOCK FIRST ?YES NO Once you have set up the items in the Plug In Menu you must select Finish. Finish tells the TV that you have selected your personal default options for the menu and clock, and unless there is a power interruption, the Plug In Menu will not show up again. To FINISH To exit and save settings Note: You can reset the options available in Plug In Menu via the regular JVC menu system: Ì Language is found in the Initial Setup Menu. Ì Auto Tuner Setup is found in the Initial Setup Menu. Ì Tuner Mode is found in the Initial Setup Menu. [. . . ] This warranty gives you specific legal rights and you may also have other rights which vary state to state. If you have questions concerning your JVC product, please contact our Customer Relations Department: JVC COMPANY OF AMERICA 41 Slater Drive DIVISION OF US JVC CORP. Elmwood Park, New Jersey 07407 Refurbished products carry a separate warranty. This warranty does not apply for details of refurbished product warranty. [. . . ]