User manual JVC AV-32H35SAE-AV-32H35 Instruction Manual

[. . . ] AV-32H35SAE LCT1364-001A-U 0303-MK-CR-JMUK Colour Television AV-32H35SAE INSTRUCTIONS © 2003 VICTOR COMPANY OF JAPAN, LIMITED Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: · Operate only from the power source specified (AC 220 ­ 240 V, 50 Hz) on the unit. · Avoid damaging the AC plug and power cord. [. . . ] 3 : turn the right speaker's volume level up. OFF ON D0019-EN STEREO / I · II When you are viewing a bilingual broadcast programme, you can choose the sound from Bilingual I (Sub I) or Bilingual II (Sub II). When the stereo broadcasting is received poorly, you can change from stereo to mono sound so that you can hear the broadcast more clearly and easily. s: Stereo sound v : mono sound t : Bilingual I (sub I) u : Bilingual II (sub II) · The sound mode you can choose differs depending on the TV programme. · This function does not work in the EXT modes. And this function does not appear in the SOUND SETTING menu. HYPER SOUND You can enjoy sounds with a wider ambience. · The HYPER SOUND function does not work properly with mono sound. · You can turn on or off the HYPER SOUND function with a single press. For details, see "HYPER SOUND function" on page 14. 22 EXT SETTING Refer to "Using the TV's menu" (see page 18) for details of displaying the menu. EXT SETTING EXT-1 EXT-3 DUBBING EXT-2 To cancel the S-IN (S-VIDEO input) setting: Press the yellow button and turn off S-IN (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed. · The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S-VIDEO input) in the EXT-1 terminal. · Setting S-IN (S-VIDEO input) changes the head character from "E" to "S". For example, "E2" is changed to "S2". · Even a device which enables the SVIDEO signal (Y/C signal) to be output may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because S-IN (SVIDEO input) setting has been made, read the device Instruction Manual carefully again to check for the device settings. EXT-4 TV BACK TV OK ID LIST S-IN D0020-EN S-IN (S-VIDEO input) When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/ C signal) to be output, you can enjoy highquality picture of the S-VIDEO signal (Y/C signal). Preparation: · At first, read the Device Instruction Manual and "Additional preparation" on page 37 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV. · Do not set S-IN (S-VIDEO input) to the EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear. 1 Choose an EXT terminal 2 Press the yellow button and set the S-IN (S-VIDEO input). Then press the a button An S-IN (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal). ID LIST You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. [. . . ] If the speakers causes such phenomena, use the magnetic-shielded speakers instead. · A picture may be tilted due to the influence of the earth's magnetism. In this case, use the "PICTURE TILT" on page 21 to complete the tilt. · It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. [. . . ]