User manual JVC AV-32T4BK

[. . . ] AV-32T4SK AV-32T4BK AV-28T4SK AV-28T4BK AV-32T4SR AV-32T4BR AV-28T4SR AV-28T4BR COLOUR TELEVISION INSTRUCTIONS Warning DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply. If a new mains plug has to be fitted, then follow the instruction given below: Important Do not make any connection to the larger terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow. [. . . ] 2 : lighter 3 : deeper HUE You can adjust the picture tint. 2 : reddish 3 : greenish · You can change the HUE setting (picture hue) when the colour system is NTSC 3. 58, or NTSC 4. 43. D0014-EN · While the PICTURE menu is displayed, pressing the blue button will set the CONTRAST, BRIGHT, SHARP, COLOUR, HUE settings to their default settings. PICTURE MODE You can choose one of three PICTURE MODEs to adjust the picture settings automatically. BRIGHT: Heightens contrast and sharpness. STANDARD: Standardizes picture adjustment. SOFT: Softens contrast and sharpness. COLOUR TEMP. You can select one of three COLOUR TEMP. modes (three tones of white) to adjust the white balance of the picture. Since white is the colour which is used as a reference for all the other colours, changing the COLOUR TEMP. mode affects the appearance of all the other colours on the screen. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture. Using this mode when watching films allows you to enjoy colours that are characteristic of films. CONTRAST You can adjust the picture contrast. 2 : lower 3 : higher BRIGHT You can adjust the picture brightness. 2 : darker 3 : brighter SHARP You can adjust the picture sharpness. 2 : softer 3 : sharper 20 PICTURE menu FEATURES Choose FEATURES and press the a or 3 button to display the sub-menu. FEATURES AUTO VNR COLOUR SYSTEM 4:3 AUTO ASPECT TV OK COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. Then press the a or 3 button The sub-menu of the COLOUR SYSTEM function appears. COLOUR SYSTEM PAL TV OK MIN D1015-EN AUTO VNR VNR Stands for "video noise reduction". AUTO: This mode reduces any "noise" (interference or snowing) in the current picture. The function also adjusts the optimum sharpness of the picture (SHARP). OFF: The AUTO VNR function is cancelled. If you set the mode to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the mode to OFF. However, any noise remaining in the original picture may be emphasized. MIN: This mode reduces any noise irrespective of the state of the picture. If you set the mode to AUTO but feel that the sharpness of the original picture has not been reproduced, change the mode MIN. [. . . ] Use the remote control in front of your TV or from less than seven metres away. · When you are viewing a teletext programme, you cannot operate the menus. Press the b button to return to the ordinary TV programme, and then try operating the menus. · If the TV suddenly stops responding, press the main power button on the TV and turn off the main power. [. . . ]