User manual JVC AV-32X37

[. . . ] AV-32X37HKE/AV-28X37HKE/AV-32X37HIE/AV-28X37HIE LCT1333-001A-U 0103-T-CR-JMUK Colour Television AV-32X37HKE AV-28X37HKE AV-32X37HIE AV-28X37HIE INSTRUCTIONS © 2003 VICTOR COMPANY OF JAPAN, LIMITED Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: · Operate only from the power source specified (AC 220 ­ 240 V, 50 Hz) on the unit. · Avoid damaging the AC plug and power cord. [. . . ] You can choose from the three DIGITAL VNR function settings of AUTO, MIN and MAX. The TV and external input may be given different DIGITAL VNR settings. AUTO: The TV will automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture. · If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can. MIN: The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN. · The MIN setting is not suitable for lowquality pictures which contain a lot of noise. MAX: The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX. · The MAX setting is not suitable for highquality pictures which contain very little noise. 21 PICTURE FEATURES MAX: The level of DigiPure effect is set to the maximum. If you set the DigiPure Pro function to AUTO but feel that the original picture quality has not been reproduced fully, change the setting from AUTO to MAX. · The MAX setting is not suitable for lowquality pictures which contain a lot of noise. OFF: The DigiPure Pro function is turned off. · The AUTO function may not work properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually. · You cannot choose NTSC 3. 58 or NTSC 4. 43 for programme number PR 0 (AV) to PR 99. COLOUR SYSTEM The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually. COLOUR SYSTEM MOVIE THEATRE The MOVIE THEATRE function displays a cinema film picture more smoothly and naturally on the screen. AUTO: The television automatically recognizes the type of signal and turns the function on and off. · The motion may appear unnatural when viewing images with the NTSC colour system. When the MOVIE THEATRE function is set to AUTO or ON, the motion may appear unnatural when viewing images with the NTSC colour system. PAL BACK TV OK D1016EN 1 Choose COLOUR SYSTEM then press the a button 2 Press the 5 buttons to choose the appropriate colour system. Then press the a button PAL: PAL system NTSC 3. 58: NTSC 3. 58 MHz system NTSC 4. 43: NTSC 4. 43 MHz system AUTO: This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or EXT terminal. 22 PICTURE FEATURES 4:3 AUTO ASPECT You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio). [. . . ] If the TV is turned off suddenly, try to press the # (standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem. · When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the c button again. 41 Specifications Item Colour systems Channels and frequencies Sound-multiplex systems Teletext systems Power requirements Power consumption Picture tube size Audio output Speakers EXT-1 terminal Model AV-32X37HKE (UK model) CCIR I AV-28X37HKE (UK model) Broadcasting systems PAL · The EXT terminals also support the NTSC 3. 58/4. 43 MHz system. [. . . ]