User manual JVC AV-P950U-AV-P950

[. . . ] R DIGITAL PRESENTER MANUEL D'INSTRUCTIONS : PRESENTOIR NUMERIQUE BEDIENUNGSANLEITUNG : DIGITALEN VORFÜHRERS MANUALE DI ISTRUZIONI : DIGITAL PRESENTER DISPOSITIVO PER PRESENTAZIONI AV-P950E INSTRUCTIONS This instruction book is made from 100% recycled paper. SS961589-001 ITALIANO DEUTSCH FRANCAIS ENGLISH SAFETY PRECAUTIONS Due to design modifications, data given in this instruction book are subject to possible change without prior notice. WARNING TO PREVENT FIRE OR HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. · Use only with the rated power supply. To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three-pin power point which is effectively grounded through the normal household wiring. · Do not modify the unit or operate it with the cover removed. · Do not allow flammable objects, water or metallic objects to get inside the unit as this could cause damage and malfunctions. · When the unit is not to be used for a long period of time, disconnect the power cord from the power outlet. · When there is any abnormality (noise, smoke, etc. ), immediately switch off the unit, disconnect the power cord from the power outlet, and contact your nearest JVC-authorized service agent. WARNING This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures at his own expense. 2 Thank you for purchasing the JVC AV-P950 Digital Presenter. [. . . ] When the power is supplied, SOURCE SELECT is set to CAMERA and FREEZE is set to OFF. · While the menu is displayed on the screen, settings for TEXT MODE, BW/COLOR, NEGA/POSI and LIGHTS cannot be altered. To make alteration, first exit the menu display and then change the setting. 10 Remote control unit To use the remote control unit, point it toward the remote control light receptor (at the top of the camera head). The effective operating distance is up to 5 meters from the receptor (with new batteries). The remote control unit requires two standard AA batteries. Open the cover of the battery case on the rear of the remote control unit and set the batteries in the correct direction, according to the + and - marks. 5 6 FREEZE ON OFF EXT IN 4 3 1 2 PICTURE MEMORY AUTO BRIGHTNESS AUTO FOCUS 7 AUTO WHITE OUT ZOOM REMOTE CONTROL UNIT SSV3932 3 2 1 IN Functions Items Functions Use to change the output size of an object to shoot. Use to adjust the focus of the camera picture. Use to adjust the brightness of the camera picture. Use to select and output the picture input to the EXT INPUT connector. Use to switch the camera picture to a live action image or a still image. Use to select and output the picture stored in memory. Use to adjust the white balance of the camera picture. 1ZOOM [IN/OUT] 2FOCUS 3BRIGHTNESS 4EXT IN 5FREEZE [OFF/ON] 6PICTURE MEMORY 1/2/3 7AUTO WHITE · You cannot store a picture in memory with the PICTURE MEMORY button on the remote control unit. · The provided batteries (AA) should only be used to check operation. Install new batteries before use. Notes on the remote control unit Light reception range of the remote control unit is within a horizontal radius of 5 meters from the remote control light receptor. Use the remote control unit within this range. If direct sunlight or powerful illumination (inverted fluorescent light, flash light, etc. ) or infrared light are shone on the remote control light receptor, the remote control may not function properly. In that case, change the position of the unit or the direction of the illumination. Remote control light receptor approx. 20° Horizontal direction of 360° Vertical direction of approx. 20° If there is a person or an object between the remote control and the light receptor, signal reception may not be possible. When the camera head is rotated to shoot surrounding objects, the light receptor may not receive the signal. If the remote control is dropped or a violent shock is applied to it, the internal mechanism and electronic parts may be damaged. When batteries are close to depletion, signal reception weakens. [. . . ] Have you set the optimum values for RED LEVEL and BLUE LEVEL on the menu display? Make sure that the negative mode is not engaged. When this unit is used near equipment generating a strong electric wave, beats may occur in the picture. Keep this unit away from such equipment. [. . . ]