User manual JVC AV28WZ4

[. . . ] Avoid improper installation and never position the unit where good ventilation is unattainable. When installing this television, distance recommendations must be maintained between the 15 cm floor and wall, as well as installation in a tightly enclosed area or piece of furniture. Adhere to the minimum distance guidelines shown for 10 cm 10 cm 15 cm safe operation. Do not allow objects or liquid into the cabinet openings. [. . . ] · This function does not work in the EXT modes. And this function does not appear in the SOUND SETTING menu. 18 EXT SETTING EXT SETTING EXT-1 EXT-3 EXT-4 TV BACK TV OK DUBBING EXT-2 ID LIST S-IN D0020-EN To display EXT SETTING menu: 1 Press the a button to display MENU (main menu). Note: · The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S-VIDEO input) in the EXT-1 terminal. · Setting S-IN (S-VIDEO input) changes the head character from "E" to "S". For example, "E2" is changed to "S2". · Even an device which enables the S-VIDEO signal (Y/ C signal) to be output may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because S-IN (SVIDEO input) setting has been made, read the device Instruction Manual carefully again to check for the device settings. ENGLISH 2 Press the 6 button to choose EXT SETTING. Then press the a button. I ID LIST You can have a name corresponding to the devices connected for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, together with the name. I S-IN (S-VIDEO input) When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/C signal) to be output, you can enjoy high-quality picture of the S-VIDEO signal (Y/C signal). 1 Press the 6 buttons or 5 buttons to choose an EXT terminal. Preparation: · At first, read the Device Instruction Manual and "ADDITIONAL PREPARATION" on page 29 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that a S-VIDEO signal (Y/C signal) can be output to the TV. · Do not set S-IN (S-VIDEO input) to the EXT terminal connected to a device which cannot output a S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear. 2 Press the blue button to display the name list (ID LIST). EXT SETTING EXT-1 EXT-3 EXT-4 DUBBING EXT-2 ID LIST VHS S-VHS DVC SAT STB GAME LD DVD 8mm Hi-8 1 Press the 6 buttons or 5 buttons to choose an EXT terminal. TV TV BACK OK 2 Press the yellow button and set the S-IN (SVIDEO input). A y (S-VIDEO input) mark is displayed. 3 Press the a button. The Sub-menu of CHILD LOCK appears. CHILD LOCK PR AV 01 02 03 04 05 06 07 08 09 ID BBC1 CH / CC CH CH CH CH CH CH CC CC CC 21 22 23 24 25 26 01 02 03 LOCK BACK TV OK D0026-EN 21 FEATURES 4 Press the 6 buttons to choose a TV channel. Every time you press the 6 buttons, the Programme number (PR) changes, and the picture of the TV channel registered in the Programme number (PR) is displayed on the screen. 5 Press the blue button and set the CHILD LOCK function. n (CHILD LOCK) appears and the TV channel is locked. To reset the CHILD LOCK function: Press the blue button again. n (CHILD LOCK) disappears. 6 Press the a button to complete the setting. The menu disappears. Note: · To disable easy resetting of the CHILD LOCK function, the menu disappears by choosing the CHILD LOCK function and pressing the a button as in the ordinary menu operation. Note: · Even if you reset the lock temporarily, it does not mean that the CHILD LOCK function set for the TV channel is cancelled. The next time anyone attempts to view the TV channel, it will be locked again. · When you would like to cancel the CHILD LOCK function, you must perform the operation "To set the CHILD LOCK function" again. · To disable easy choosing of a Programme number (PR) in which a locked TV channel has been registered, the Programme number (PR) has been set that it cannot be chosen by the 6 buttons or the operation buttons at the TV. · To disable easy resetting of the lock, "ID NO. " (ID NO. input screen) is set so that it cannot appear unless you press the h (Information) button. I DECODER (EXT-2) Only when connecting a Decoder with a T-V LINK compatible VCR connected to the EXT-2 terminal, you can use this function. To operate this function, see "Using the DECODER (EXT-2) function" on page 28. Caution: To view a locked TV channel 1 Choose a Programme number (PR) in which a TV channel locked with the Number buttons or PR LIST. The screen changes to blue and the n (CHILD LOCK) appears. [. . . ] Follow the description "Picture Adjustment" on page 15 to try to adjust them properly. 33 TROUBLESHOOTING Other concerns · When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV is turned off suddenly, try to press the # (Standby) button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem. · When a WSS signal is included in the broadcast signal or the signal from an external device, or when the TV is receiving a control signal from an external device, the ZOOM mode will change automatically. [. . . ]