User manual JVC AX-R551BK

[. . . ] Retain this information for future reference. Serial No. LVT0375-001A [J] Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] Press and hold AUTO PRESET button on the remote control for more than two seconds. The system automatically starts searching for stations with the strong signals continuously, and they are stored successively into memory as follows: To preset stations manually -- Manual Preset 1 Press 4 / ¢ (lower/higher frequencies) button to tune in the desired station manually. 2 Press SET button. "SET" appears in the display window for a while (not blinking). « « « · Note that "SET" message disappears, presetting procedure is cancelled. 3 Rotate MULTI JOG dial or press repeatedly UP/ DOWN button to select the preset channel numbered from 1 to 30 on FM, or 1 to 15 on AM. When you unplug the AC power cord or if a power failure occurs The preset stations will be erased in a few days. If this happens, preset the stations again. To change the FM reception mode · Note that the selected channel "02" disappears, presetting procedure is cancelled. · When an FM stereo broadcast is hard to receive or noisy, press FM MODE button on the remote control so that MONO indicator lights in the display window. · To restore the stereo effect, press FM MODE button again so that STEREO indicator lights in the display window. In this stereo mode, you can hear stereo sounds when a program is broadcast in stereo. 4 Press SET button again. "STORED" appears in the display window for a while. 5 The tuned station in step 1 is now stored in the preset channel selected in step 3. Storing a new station on an used channel erases the previously stored one. 15 Buttons behind the sliding panel BASS TREBLE FM MODE PLAY MODE REPEAT AUTO PRESET PLAY MODE REPEAT SET CANCEL UP/DOWN DISPLAY /CHARA. 4 ¢ SET CANCEL ENTER PLAY MODE REC MODE TITLE /EDIT CLOCK /TIMER TITTLE/EDIT DISPLAY /CHARA. UP ENTER CANCEL < MD TAPE SET DOWN > AUX CANCEL 4¢ SET PLAY MODE 0 (open/close) POWER STANDBY/ON </> CD 6 (play/pause) 4/¢ 7 (stop) ERTER COMPACT COMPONENT S FM/AM CD FM/AM MULTI JOG MOS - FET VOLUME 7 (stop) 6 (play/pause) MULTI JOG Playback mode indicators You can use Normal, Program, Random, or Repeat Play. · When using the buttons behind the sliding panel, press OPEN/CLOSE button on the AX-R551BK to open the sliding panel first. · When using the remote control, press CD 6 (play/ pause) button first and 7 (stop) button successively. · DO NOT try to open or close the CD tray by hands as it will be damaged. The programed tracks are played back in the order you have set. · Other CD operations are the same as Normal play. Press 7 (stop) button to quit the Program play. · When Program play finished, CD unit automatically stops. 7 To check the program contents Before playing back the CD, you can check the program contents by using 4 / ¢ button. Press ¢ button: Shows the programed tracks in the programed order. Press 4 button: Shows them in the reverse order. 18 English Continued English Continued Playing at Random -- Random Play The tracks of the loaded CD will play in no special order (at random) when you select this mode. Repeating Tracks -- Repeat Play You can have the entire disc, the programed tracks, or the individual track repeat as many times as you like. 1 Place a CD. If the current playing source is not the CD, press 6 (play/pause) button on the CD unit, then 7 (stop) button before going to the next step. Press PLAY MODE button repeatedly until "CD RANDOM" appears in the display window. 1 Place a CD. If the current playing source is not the CD, press 6 (play/pause) button on the CD unit, then 7 (stop) button before going to the next step. Press REPEAT button on the remote control repeatedly to set the repeat mode. · Each time you press the button, repeat mode indicators light in the display window, and Repeat playback mode changes as follows: 2 2 · Each time you press the button, playback mode indicator also changes as follows: PROGRAM RANDOM Canceled (Normal play) Canceled (Normal play) : 3 Press 6 (play/pause) button on the CD unit. Repeats one track on the CD or in a program. [. . . ] WHAT WE WILL DO: If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. [. . . ]