User manual JVC BD-X201ME

[. . . ] DVD RECORDER BD-X201M INSTRUCTIONS BUSY OPERATE OPEN/CLOSE DVD RECORDER BD-X201M AUDIO CH1 CH2 DOLBY DIGITAL LPCM MPEG OPTION DV TITLE CHAPTER PHONES REV STOP PLAY FWD PAUSE REC TOP MENU SET MENU Thank you for purchasing this product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. For Customer Use : Enter below the Serial No. which is located on the bottom of the unit. [. . . ] A new title is created in the unused section of the disc, and recording starts from that title's first chapter. Erase the recorded data (as described below), and then record new content. Notes If data has been erased from a disc using a different DVD recorder, it may not be possible to record new content to it using this recorder. To avoid this type of situation, ensure that this DVD recorder is used to erase recorded data. New content cannot be recorded to discs that have been finalized. It is possible to cancel the finalization and add a recording to a DVD-RW finalized on this machine. Regardless of whether or not finalization has been carried out, it will not be possible to use this DVD recorder to record new content to a disc that has been recorded on using other devices. 27 Settings & Controls for Recording Erasing All Data From a DVD-RW Disc DISC menu screen DISC MENU MENU FINALIZE CANCEL DISC FINALIZATION AUTO FINALIZE AUTO CANCEL DISC FINALIZ. DISC ERASE ( QUICK ) DISC ERASE ( FULL ) LAST TITLE ERASE CANCEL CANCEL OFF OFF EXECUTE CANCEL CANCEL 1. Insert the DVD-RW from which data is to be erased. Press the SET UP button to display the Setup Menu. Use the 7 and 6 buttons to select DISC item and then press the SET button. The DISC menu screen will appear. 4. Press the 7 or 6 button, select either the DISC ERASE (QUICK) item or the DISC ERASE (FULL) item, then press the SET button. The setting value list box is displayed. DISC ERASE (QUICK): Only the disc control area is erased. (Quick Erase) Compared with Full Erase the time to erase is DISC ERASE (FULL): shorter. (Full Erase) This setting is recommended for repeated use of a disc. DISC ERASE(QUICK) 5. Use the 7 and 6 buttons to select EXECUTE from the list and then press the SET button. The erasing of data will begin. The message "DISC ERASE" appears and the state of progress is displayed using a progress bar. When all data has been erased, the progress bar will disappear. Note When either a new DVD-RW or one that has been erased on another machine is inserted, quick erase starts up. CAUTION All of the data recorded to the disc will be erased in this process. Before starting, therefore, confirm that no important data is stored on this disc. Under no circumstances should the power be turned off or the power cord disconnected while data is being erased. Canceling the Finalization of a DVD-RW When adding an extra recording to a finalized DVD-RW, cancel the finalization. DISC menu screen DISC MENU MENU FINALIZE CANCEL DISC FINALIZATION AUTO FINALIZE AUTO CANCEL DISC FINALIZ. DISC ERASE ( QUICK ) DISC ERASE ( FULL ) LAST TITLE ERASE CANCEL EXECUTE OFF OFF CANCEL CANCEL CANCEL 1. Insert the DVD-RW whose finalization you want to cancel. [. . . ] (Names may be up to 20 characters in length. Alphanumerical characters and hyphen (-)) CANCEL : Cancel setting the host name. This parameter is used to set the IP address. It is important to ensure that no two devices on a single network share the same IP address. IP ADDRESS IP Add SUBNET MASK SUbNET DEFAULT GATEWAY GATE MENU MENU [192. 168. 0. 2] [192] [255. 255. 255. 0] [255] [192. 168. 0. 254] This parameter is used to set the subnet mask. [. . . ]