User manual JVC C-20110

[. . . ] COLOR TELEVISION USER'S GUIDE For models: C-13110 C-13111 C-20110 AV-20120 AV-20121 AV-27115 AV-27120 Illustration of AV-27120 and RM-C381 IMPORTANT NOTE TO THE CUSTOMER In the spaces below, enter the model and serial number for your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use. Serial Number Model Number IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:To reduce the risk of electric shock. [. . . ] Press the MENU button To AUTO TUNER SETUP To operate TUNER MODE : START CABLE AIR Channel Summary Channel Summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels. Press the MENU button To CHANNEL SUMMARY To operate The Channel Summary screen (below) will now be displayed with the channels set to scan marked with an "X". You can delete channels from the scan by removing the "X". If any channels were missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the channel number. CH 01 02 03 04 05 ADD ­ X X X X : : : : : : CH 06 07 08 09 10 ADD X ­ ­ X X To choose CABLE or AIR To move to START To start Auto Tuner Setup NOW PROGRAMMING !48 ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ Programming will take approximately 1 to 2 minutes. PROGRAMMING OVER! To the ADD column To include or delete from scan Exit when finished · Noise Muting will not work during Auto Tuner Setup. NOTES: Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from your scan by removing the "X" next to it on the Channel Summary screen. 14 Initial Setup Channel Summary - Lock Press the MENU button To CHANNEL SUMMARY To operate To the Lock Column Zero to lock or unlock that channel CH 01 02 03 04 05 ADD X X X X X ­ ­ ­ ­ ­ : : : : : : CH 06 07 08 09 10 ADD X ­ ­ X X ­ Set Lock Code (V-Chip, which appears before Set Lock Code in the onscreen menu system, is discussed in the four-page section beginning on page 15). Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below. Press the MENU button To SET LOCK CODE ­ ­ To operate Exit when finished The padlock icon appears Press ZERO to access the Lock Code LOCK CODE FINISH 0000 Channel Guard Message When a viewer attempts to watch a guarded channel, the following message appears: THIS CHANNEL IS LOCKED BY CHANNEL GUARD. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT. - - - - The first digit will be highlighted To select the number To move to the next digit Continue to follow these directions for all four numbers To FINISH To save your settings and exit THANK YOU !! To watch a channel that you have locked, enter the Lock Code using the 10 key pad (see "Set Lock Code" - at the top of the next column). If the wrong code is entered, this message will flash on the screen: INVALID LOCK CODE ! The channel cannot be accessed until the correct code is entered. · Once a channel has been unlocked, it will remain unlocked until the television is turned off. NOTES: After a power interruption you must reset the Lock Code. Write your Lock Code number down and keep it hidden from potential viewers. If you forget the Lock Code, a new code may be set using the steps listed above. V-Chip 15 V-Chip Your TV is equipped with V-Chip technology which enables TV Parental Guideline and Movie (MPAA) Guideline controls. V-Chip technology allows you to program your TV to receive, or not to receive, programs based on content according to the guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer attempts to watch a blocked channel, this message appears: THIS PROGRAMMING EXCEEDS YOUR RATINGS LIMITS. PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT. [. . . ] Some states do not allow the exclusion of incidental or consequential damages or limitations on how long the warranty lasts, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary state to state. JVC COMPANY OF AMERICA 1700 Valley Road DIVISION OF JVC AMERICAS CORP. Wayne, New Jersey 07470 http://www. jvcservice. com REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY. [. . . ]