User manual JVC CA-MXGB6

[. . . ] COMPACT COMPONENT SYSTEM CA-MXGB6 CA-MXGB5 INSTRUCTIONS LVT1188-003A [B] Warnings, Cautions and Others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] · If the stations alternate intermittently between the station tuned by this function and the currently tuned station, cancel this function by following the procedure in the left column. · The Enhanced Other Networks function is canceled when you change the source to CD, TAPE or AUX. · The Enhanced Other Networks function is temporarily canceled when you change the band to AM (MW). 14 Playing Back CDs This unit has been designed to playback the following CDs: · Audio CD · CD-R (CD-Recordable) · CD-RW (CD-ReWritable) · MP3 disc (MP3 files recorded on a CD-R or CD-RW)* When playing a CD-R or CD-RW · User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already "finalized. " · Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully. · Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player's lens is dirty. Important notices: · In general, you will have the best performance by keeping your CDs and the mechanism clean. - Store CDs in their cases, and keep them in cabinets or on shelves. - Keep the unit's carrousel closed when not in use. · Continuous use of irregular shaped discs (heart-shape, octagonal, etc. ) can damage the disc rotating mechanism. Loading CDs 1 Press CD 0. The unit automatically turns on and the carrousel comes out. 2 Place one or two discs correctly on the front recesses of the disc tray, with its label side up. CORRECT INCORRECT · When using a CD single (8 cm), place it on the inner recess of the disc tray. 3 If you wish to load a third disc, press DISC CHANGE on the unit or DISC SKIP on the remote control. The disc tray rotates by 120°. 4 Press CD 0 again. The carrousel closes. · CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs. *For MP3 discs · This unit manages files and folders on MP3 discs as "tracks" and "albums. " · Playback order of the MP3 files (tracks) recorded on a disc are determined by the writing (or encoding) application; therefore, playback order may be different from the one you have intended while recording the files and the folders. · This unit shows the file (track) names and the ID3v1/1. 1 tags (only "Title" and "Artist") on the display after the file starts play; however, there is a limitation on available characters and some file names and ID3v1/1. 1 tags are not shown correctly. More about MP3 discs · MP3 discs (either CD-R or CD-RW) require a longer readout time. (It varies due to the complexity of the recording configuration. ) · When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as the disc format. · This unit does not support multisession recording. · This unit can play MP3 files only with the following file extensions-- ". MP3, " ". Mp3, " ". mP3, " and ". mp3. " · Non-MP3 files are ignored. If non-MP3 files are recorded together with MP3 files, this unit will take a longer time to scan the disc. It may also cause the unit to malfunction. · Some MP3 discs may not be played back because of their disc characteristics or recording conditions. Playing Back CDs--All Disc and One Disc You can play all loaded CDs continuously--All Disc play, or one selected disc--One Disc play. All Disc play On the unit ONLY: 1 Load CDs. · If the current playing source is not the CD player, press CD 6, then 7 before going to the next step. 2 Press REPEAT repeatedly so that the ALL DISC indicator lights up on the display. For Audio CD: Total playing time TRACK WOOFER ALL DISC Total Track number ALL DISC indicator MP3 indicator MP3 For MP3 disc: GROUP WOOFER ALL DISC GROUP indicator appears when the MP3 playback mode is the ALBUM mode. See also page 19. 15 Continued · Each time you press the button, the indication on the display changes as follows: ALL DISC (initial setting) · When the MP3 playback mode is the TRACK mode (See also page 19. ) Current track title scrolls. MP3 1 DISC REPEAT 1* REPEAT ALL DISC* REPEAT 1 DISC* * See page 21. 3 Press one of the disc number buttons (CD1, CD2 or CD3) for the disc you want to start to play from. CD play starts from the first track of the selected disc. · Pressing CD 6 instead of the disc number buttons starts playing back if a CD is on the tray. For Audio CD: Track number of the currently playing disc flashes (Track numbers exceeding 16 are not displayed. ) TRACK WOOFER ALL DISC When the track includes the ID3v1/1. 1 tags, "Title" and "Artist" will scroll after the track title. · "<TITLE>" appears before the content of "Title" scrolls and "<ARTIST>" appears before the content of "Artist" scrolls. Current track number** Elapsed playing time MP3 WOOFER ALL DISC ** In the TRACK mode, the unit manages only files (tracks) on the MP3 disc. Folders (albums) are not recognized. ALL DISC WOOFER Current track number Elapsed playing time For MP3 disc: · When the MP3 playback mode is the ALBUM mode (See also page 19. ) Current album number GROUP MP3 To stop during play, press 7. · For MP3 disc, this unit can store the number of the track that you have stopped playback. [. . . ] · Extend the FM antenna at the best position. (See page 29. ) · Plug the AC power cord. (See page 21. ) Place the disc with the label side up. Replace the disc. The readout time of the MP3 disc is too long. Do not use too many hierarchies and folders when recording. [. . . ]