User manual JVC CS-AR680

[. . . ] Do not view directly with optical instruments. Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident. [European Union only] These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. [. . . ] Then, confirm the passkey on the unit by pressing the control dial. Appear in different combination (even if the device is the same) each time pairing is made. After pairing is successful, the unit will establish Bluetooth connection with the Bluetooth device*. Use <Connect Phone/ Connect Audio> (or activate <Auto Connect>, page 18) to connect the same device from next time on. * Some devices may not be able to connect to the 4 Turn the control dial to select a device you want to delete, then press to confirm. 4 Turn the control dial to select a device you want to connect/disconnect, then press to confirm. Using a Bluetooth mobile phone Making a call ] Select a calling method or make a setting. (Dialed Calls/ Received Calls/ Missed Calls/ Phonebook/ Dial Number/ Voice/ Settings) If "Dialed Calls/ Received Calls/ Missed Calls/ Phonebook" is selected in step 2 . Turn the control dial to select the name/ phone number you want to call, then press the control dial to confirm. ⷠ"No History Found" appears if there is no history stored. Turn the control dial to select a number or character (0 ­ 9, #, , +), press 4 /¢ to move to the entry position. Using a Bluetooth audio player " If playback does not start automatically, operate the Bluetooth audio player to start playback. Repeat Track : Repeats current track All : Repeats all tracks Group : Repeats all tracks of the current group Random All : Randomly plays all tracks Group : Randomly plays all tracks of the current group To cancel repeat play or random play, select "Off. Using the remote controller 2 / 3 : [Press] Reverse skips or forward skips. Repeat step 2 to select a setting item (see table on page 18), then repeat the procedure to change the setting accordingly. Delete Pairing Phonebook Trans Turn the control dial to select the device you want to delete, then press the control dial to confirm. (page 14) You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may need to enter the PIN code or verify passkey from the mobile phone to do pairing. you can transfer a maximum of 400 numbers. You can change the PIN code of your choice before pairing (1-digit to 6-digit number). [ Initial: 0000 ] Turn the control dial to select a number, press 4 /¢ to move to the entry position, then press the control dial to confirm the entry. On : The connection is established automatically with the registered Bluetooth device when you turn on the unit. [. . . ] / Connect the player again, when the sound is not yet restored. Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). The sound is interrupted or skipped during playback of a Bluetooth audio player. The unit does not response when you You may have tried to copy the same entries (as stored) to the unit. [. . . ]