User manual JVC DLA-HD350BU

[. . . ] ENGLISH FRANÇAIS ESPAÑOL/CASTELLANO Getting Started INSTRUCTIONS MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA DLA-HD350 DLA-HD350 1108TTH-AO-AO DLA-HD350 Preparation D-ILA PROJECTOR PROJECTEUR D-ILA PROYECTOR D-ILA Basic Operation Settings Troubleshooting For Customer use : Enter below the serial No. which is located on the side of the cabinet. Retain this information for future reference. DLA-HD350 Pour utilisation par le client : Entrer ci-dessous le N° de série qui est situé sous le boîtier. [. . . ] ● This setting can also be configured from the remote control. ( * “Gamma Adjustment” P16) ① ② Select the reference gamma curve coefficient (1. 8 ～ 2. 6) in “Correction Value”. Select the color to be adjusted in the gamma adjustment screen. Picture Adjust > Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset 0 50 100(%) Settings 2. 2 Exit MENU Select Operate Back BACK ③ Adjust the gamma curve in the gamma curve adjustment screen. Picture Adjust > Picture Adjust Troubleshooting Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset Input: 10% Output:100 Exit MENU > Gamma Normal A B C Costom1 Costom2 Costom3 Correction Value 1023 White Red Green Blue 512 Copy Paste Reset Input: 50% Output: 580 Exit MENU 2. 2 2. 2 0 50 100(%) 0 50 100(%) Select Back Operate Back BACK Select Back Operate Back BACK Select the point where the gradation (brightness) is to be adjusted with the / buttons. Adjust the gradation (brightness) with the / buttons. ④ To end BACK BACK Save gamma data?Yes No OK Others ● If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to revert back to its original form. In that case, select “Reset”. 31 4 Settings Setting Menu (Continued) Picture Adjust 08 Advanced Adjusts the contours of the image and detailed composition of the image. Sharpness Sharpness Detail Enhancement RNR NR* MNR BNR Off CTI* Low Middle High 09 Lens Aperture 1 Lens Aperture 10 Reset Reset the setting. * In case of HD signals or PC signals, NR and CTI cannot be set. 2 3 Dark Medium Bright Reduces color smear. (Soft) 0 to 100 (Sharp) (Soft) –50 to 50 (Strong) (Soft) 0 to 16 (Strong) (Soft) 0 to 16 (Strong) On Off Adjusts the outline of image. Adjusts the intensity of removing image noise. Adjusts the intensity of removing mosquito noise. Input signal remains unchanged. ● Abbreviations NR: Noise Reduction RNR: Random Noise Reduction MNR: Mosquito Noise Reduction BNR: Block Noise Reduction CTI: Color Transient Improvement 32 ENGLISH Getting Started Input Signal > HDMI 11 HDMI Configures HDMI input signal. Auto Input Standard Enhanced Auto Color Space YCbCr(4:4:4) YCbCr(4:2:2) RGB Control with HDMI On Off Automatically configures the input signals. Select this when the dynamic range of the input images is 16-235. Select this when the dynamic range of the input images is 0-255. Automatically configures the input signals. Select this when the Y Cb Cr(4:4:4) video signals are input. Select this when the Y Cb Cr(4:2:2) video signals are input. Select this when the RGB video signals are input. Disables CEC communications. Preparation Basic Operation ● The setting is available only if the HDMI terminal is selected. ● Abbreviation CEC: Consumer Electronics Control Input Signal > COMP. 12 COMP. Configures the input signal for the component video input terminals. [. . . ] This may cause the unit to malfunction. ● Clean the dirt using commercial blowers or lens cleaning papers for cleaning glasses and cameras. This may lead to peeling of the surface coating film. Parts Replacement This unit contains parts (optical part, cooling fan, etc. ) that require replacement to maintain its functioning. The estimated time for parts replacement varies greatly depending on the usage and environment. Please consult your authorized dealer for replacement. 54 ENGLISH Getting Started Mounting this Unit Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention during emergencies including earthquakes. [. . . ]