User manual JVC DLA-HD950

[. . . ] Remember to retain your Bill of Sale for Warranty Service. DO not attempt to service the product yourself to prevent electrical shock , do not open the cabinet. There are no user serviceable parts inside. Retain this information for future reference. [. . . ] This is the setting for expressing rich dark tones. this is the setting for the characteristic tonal qualities of film. This setting provides even richer darker tones than setting B. Three different kinds of gamma can be set according to your preferences. "Normal" is suitable for normal circumstances but other settings can be selected according to your preferences. This setting can also be configured from the remote control. Select the point where the gradation (brightness) is to be adjusted with the / buttons. You can switch between "Before" and "After" using the [TEST] button of the remote control. If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to Revert back to its original form. Gamma Adjustment data can be copied in all modes, but it is only possible to paste in Custom 1, Custom 2, and Custom 3. Off Video mode Pause On Still mode Color Management Adjustment* All Reset Clear Motion Drive* Values of each color can be adjusted ("Red, Yellow, Green, Cyan, Blue and Magenta"). Improves fast-moving pictures to a clear image with little residual image. Furthermore, depending on the scene, the picture may be distorted. You can switch between "Before" and "After" using the [TEST] button of the remote control. After selecting "Cinema 1", "Cinema 2", or "Cinema 3" from "Picture Mode", and after adjusting "Advanced", adjustment of Brightness in each "Color Management" mode is not possible. Select this when the Y Cb Cr(4:4:4) video signals are input. Select this when the Y Cb Cr(4:2:2) video signals are input. Select this when the RGB video signals are input. For some source devices, "Auto (input)" will not function properly. Y Pb/Cb Pr/Cr Color Space RGB SCART Select this when the component video signals are input. Select this when the RGB video signals are input. Select this when RGB video signals and sync signals are input via the SCART interface for European markets. [. . . ] Measures to prevent the unit from toppling or dropping should be taken for safety reasons and accident prevention during emergencies including earthquakes. When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and use all the 4 screw holes (M5 screws) to mount. Special expertise and techniques are required for mounting this unit. Be sure to ask your dealer or a specialist to perform mounting. [. . . ]