User manual JVC DLA-X900R

[. . . ] Troubleshooting For Customer use : Enter below the serial No. Which is located on the side of the cabinet. Retain this information for future reference. Modelo Nº DLA-X900R / DLA-X700R / DLA-X500R Nº de serie Others Not suitable for household room illumination. [. . . ] Color Profile is fixed when “THX” is selected as the “Picture Mode”. Color is a wide color space standard for used in videos; it includes wider color gamut than the HDTV standard. 37 Adjusting to the Preferred Color (Color Management) Based on the setting of the selected “Color Profile”, you can adjust each of the following colors according to your preference: Red, Orange, Yellow, Green, Cyan, Blue, and Magenta. 1 2 Press the [ADVANCED MENU] button to display the “Color Profile” menu Set “Color Management” to “On”, and press the [OK] button 0 Picture Adjust > Color Profile Color Profile Color Management Color Selection Axis Position Hue Saturation Brightness 0 0 0 0 Film 1 On Red Off On You can also perform setting from “Picture Adjust”"“Color Profile”"“Color Management” in the menu. Before Exit MENU Reset Operate Select Back BACK 3 Adjust to the preferred color. A Select “Color Selection”, and press the H I keys to select the color to adjust 0 Axis Position (Image) Green Yellow For color adjustment, select the color from the following: “Red”, “Orange”, “Yellow”, “Green”, “Cyan”, “Blue”, “Magenta”. Item Setting Range Description Fine-tune the position of the central axis of the selected color. -30 (dark) to +30 (bright) B Adjust the selected color Adjustable range when Red is selected: ± 30° with Red as the center Counterclockwise rotation: + Clockwise rotation: Red Cyan Axis Position -30 to 30 Adjust/Set Blue Magenta Hue Saturation -30 to 30 -30 to 30 Picture Adjust > Color Profile Color Profile Film 1 On Red 0 0 0 0 Brightness -30 to 30 A B Color Management Color Selection Axis Position Hue Saturation Brightness 0 0 Selecting “Reset” resets all the adjustment data. Pressing the [BEFORE/AFTER] button on the remote control enables you to check the image before adjustment. Before Reset Operate Select Back BACK Exit MENU 4 Press the [MENU] button to exit 38 Adjusting Movies for Increased Expressiveness (Multiple Pixel Control) The new image-processing algorithm developed by JVC helps to create a natural impression that is sharper at areas in focus, and softer at areas that are not in focus, enabling you to enjoy highly expressive 4K images with a greater sense of depth. 0 0 0 In the default “Original Resolution” setting (“Auto”), the resolution is set automatically. By increasing the setting range, you can expect enhanced effects. Images are displayed in the original resolution (2K) when “4K e-shift” is set to “Off”. The setting is fixed at “On” during 4K signal input. During 3D signal input and when “2D to 3D conversion” is set to “On”, the setting is fixed at “Off”. €Original Resolution”, “Zone”, “Enhance”, “Dynamic Contrast”, and “NR” can be adjusted even when “4K eshift” is set to “Off”. 1 Press the [MPC] button to display the adjustment menu 0 0 0 0 You can also perform setting from “Picture Adjust”"“MPC Level” in the menu. Picture Adjust >> MPC Level 4K e-shift On Auto Original Resolution INPUT * MPC is the abbreviation for Multiple Pixel Control. Enhance Dynamic Contrast Smoothing NR 0 0 0 0 3 Reset Operate Back BACK Press the [MENU] button to exit Toggling between the States before and after Adjustment Before Exit MENU . Select 2 Make adjustments according to your preference based on the setting of the selected “Picture Mode” * The factory setting varies with the “Picture Mode”. Item Setting Description Pressing the [BEFORE/AFTER] button on the remote control enables you to toggle between the states before adjustment (BEFORE) and after adjustment (AFTER). adjust/Set 4K e-shift On (4K)/Off Switches the display (2K) resolution. [. . . ] Others 78 Warning display You can tell the details of a warning from the (repeated) displays of the “WARNING” and “LAMP” indicators. The “STANDBY/ON” indicator, which shows the operating mode of the unit, is displayed simultaneously as described above. The Warning mode is activated once the message is displayed. Projection is interrupted, and the cooling fan is turned on for about 100 seconds. [. . . ]