User manual JVC DR-MV5SUS-DR-MV5 Instruction Manual

[. . . ] DVD VIDEO RECORDER & VIDEO CASSETTE RECORDER DR-MV5S STANDBY/ON VHS DVD REC VHS/DVD CH VHS DUBBING DVD DV IN S-VIDEO VIDEO AUDIO For Customer Use: INSTRUCTIONS Enter below the Model No. which are located on the rear of cabinet. Retain this information for future reference. Serial No. LPT1032-001A 2 EN SAFETY FIRST WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. [. . . ] 74) To clear the resume points: (The inside of the disc status indicator stops blinking and lights. ) When "RESUME" is set to "ON": · Press 1 to turn off the unit. · Press x (OPEN/CLOSE) to take out the disc. · Press TOP MENU to display the top menu, then start playback by selecting an item, etc. · Press MENU to display the disc menu, then start playback by selecting an item, etc. SLOW + (5) When "RESUME" is set to "DISC RESUME": · Set "RESUME" to "OFF". · Press TOP MENU to display the top menu, then start playback by selecting an item, etc. · Press MENU to display the disc menu, then start playback by selecting an item, etc. ANGLE Still Picture/Frame-By-Frame Playback 2 Press 4 in stop mode to resume playback. The unit starts playback from the resume point. NOTES: "DISC RESUME" setting works on DVD VIDEO, VCD and already finalized DVD-R/DVD-RW (video mode) discs. For other types of discs, the function under "ON" setting will be applied even if "RESUME" is set to "DISC RESUME". 74) If you stop the playback of a disc for which a resume point has already been memorized, the memory will be updated with the new resume point. After the unit has memorized the resume points for 30 discs, remembering a new resume point will cause the unit to delete the oldest memorized point. Stopping playback of a disc for which a resume point is already stored may change the order in which the points are stored. This may potentially change the order in which points are deleted. When the unit memorizes a resume point for a disc, it also remembers audio language, subtitle and angle settings. This function may not work for some Video CDs. When "RESUME" is changed to "ON" or "OFF" ( pg. 74), resume points of the discs memorized with "RESUME" set to "DISC RESUME" will be cleared. Resume points are memorized for each side of a double-sided disc. 1 Press 9 to pause during playback. 2 Press SLOW ­ (3) or SLOW + (5) to activate frame-byframe playback. Each press of SLOW ­ (3) or SLOW + (5) advances/reverses the still picture frame by frame. Frame-by-frame playback for reverse direction cannot be performed with Video CD discs. To resume normal playback, press 4. Slow Motion Each press of SLOW ­ (3) or SLOW + (5) increases the slow motion speed for each direction (from 1/16 to 1/2 times the normal speed). Slow motion for reverse direction cannot be performed with Video CD discs. 1 Press 9 to pause during playback. [. . . ] 55 Top menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 H High-Speed Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 57 I Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Instant Timer Recording (ITR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59, 61 Interlaced scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 U Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]