User manual JVC FS-Y1

[. . . ] COMPACT COMPONENT SYSTEM FS-Y1 Consists of CA-FSY1 and SP-FSY1 INSTRUCTIONS GVT0142-008A [B] Warnings, cautions and others IMPORTANT for the U. K. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer. BE SURE to replace the fuse only with an identical approved type, as originally fitted. [. . . ] The RESUME indicator lights on the display window when you stop playback. How to suspend playback Perform any of the following operations during playback. Press 7 once. * Press AUDIO to turn off the power. Change the source to FM, AM or AUX. * * Even if the power is turned off by pressing AUDIO after this, the position where playback has been stopped will be stored. To start playback from the stored position NOTE Set the remote control mode selector to AUDIO before using the number buttons. Press DVD/CD 3. NOTE · This function does not work in Program Playback or Random Playback. · The position where playback starts again may be a little different from the stopped position. · When a disc menu is displayed, the Resume function may not work. · The audio language, the subtitle language and the angle at that time are stored as well as the stopped position. · The stored position will be cleared if the disc tray is opened. Further, if 7 is pressed during playback, "RESUME" will be displayed. If 7 is pressed again, the stored information will be cleared. · At the time of purchase, Resume is set to ON. Resume can be set to OFF (page 30). 18 Select the scene to be played NOTE Advanced operations *1 For a VCD and SVCD, this operation can be carried out only when the PBC function is off. · This operation cannot be carried out for a disc without a menu screen. · Playback may start for some discs without pressing ENTER. Designate the time (Time search) 1 2 3 4 NOTE Set the remote control mode selector to AUDIO before using the number buttons. Press ON SCREEN twice during playback*2. The menu bar will be displayed (page 28). Press cursor 2 /3 to select . Input the time*3 using the number buttons (1-9, 0). Ex. : When you want to play a DVD VIDEO from the position of (0 hour) 23 minutes 45 seconds, press the buttons in the order: 2 3 4 5 Select the scene from the menu · If you input wrong numbers, press cursor 2 to delete the numbers and re-input. 5 1 Press MENU or TOP MENU while the disc is stopped or during playback*1. · The disc menu screen will be displayed. · Only TOP MENU can be used for DVD AUDIOs. Press ENTER. To delete the menu bar, press ON SCREEN. NOTE · This function does not work for a DVD VIDEO with no time information recorded. · This function does not work during Program or Random Playback. *2 For a VCD and an SVCD, the operation can be carried out when the disc is stopped or during playback without the PBC function. *3 Time search for a DVD VIDEO is from the beginning of the title, for a DVD AUDIO from the beginning of the track being played. Time search for a VCD, an SVCD and a CD is as follows: · When the disc is stopped, time search is from the beginning of the disc. · When the disc is being played, time search is within the track currently being played. 2 Press cursor 5//2/3 (only for a DVD VIDEO or DVD AUDIO) or the number buttons to select the scene to be played. · Refer to "How to use the number buttons" (page 15). · When the menu screen has a couple of pages, press 4 or ¢ to change the page (only for a VCD and SVCD). 3 Press ENTER. 19 Program Playback/Random Playback Play the disc in the desired order (Program Playback) It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once. 1 While the disc is stopped, press PLAY MODE repeatedly to display "PROGRAM" on the display window on the main unit. TV screen Program screen 2 Create a program following the description on the TV screen. Refer to "How to use the number buttons" (page 15). · The input content varies depending on the disc type. [. . . ] Connect the power cord correctly (page 11). 7 The screen cannot be switched. · The Progressive mode is applied only to component video output. About sound 7 There is no sound. · Speakers are not connected correctly. Page 16 · "NO AUDIO" is displayed on the display window. The disc may have been produced through illegal copying. Confirm at the store where you bought the disc. Operation 7 You cannot operate any button. · Some specific operations may be inhibited for some discs. 7 The remote control does not work. · The dry-cell batteries have run out. [. . . ]