User manual JVC GR-AXM650

[. . . ] COMPACT VHS CAMCORDER GR-AXM800 GR-AXM650 Compact VHS For Customer Use: INSTRUCTIONS Enter below the Model No. which is located on the bottom of cabinet. Retain this information for future reference. Serial No. LYT0045-001A 2 EN Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. [. . . ] To turn on again, set the Power Switch to "POWER OFF", then to "PLAY". When the Power Switch is set to "PLAY" and the LCD monitor is opened at an angle of 45 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. The playback picture can also be viewed in the viewfinder (with the LCD monitor shut) or on a connected TV ( pg. Camcorder operation is the same as described in this section. You can also view the playback picture on the LCD monitor with it flipped over and retracted. LCD monitor/viewfinder indications: ·The battery pack remaining power indicator is displayed for approx. 5 seconds on the LCD monitor when the LCD monitor is turned on, and then it disappears. However, the battery pack remaining power indicator " " blinks when the power is almost gone. ·During Stop, Fast-Forward or Rewind mode, none of the indications are displayed in the viewfinder. PLAYBACK Features Speaker EN 39 Adjust the brightness of the LCD monitor To brighten the image, turn the BRIGHT Dial toward "+". To darken the image, turn the Dial toward "­". Speaker volume control You can adjust the speaker volume by turning the VOLUME Dial. BRIGHT VOLUME 1 AT ADJUST VOLUME If you want to turn up the volume . Turn the Dial toward "­". NOTE: When the LCD monitor is turned off, sound is not heard from the speaker. MENU Jog Dial Tracking This function can be used to eliminate noise bars that appear on-screen during playback. Manual Tracking is also available. 1 ACTIVATE MANUAL TRACKING Press the MENU Jog Dial during playback mode. Keep rotating it until noise bars disappear. ·To return to Auto Tracking, press the MENU Jog Dial. When Auto Tracking finishes, the indication disappears. NOTES: When noise bars appear during playback, the camcorder enters the Auto Tracking mode and "AT" is displayed. Manual Tracking may not work with tapes recorded on other VCRs or camcorders. 40 EN PLAYBACK Features (cont. ) COUNTER R/M FEATURE: PURPOSE: OPERATION: Still Playback To pause during playback. 2) To resume normal playback, press PLAY/PAUSE again. Noise bars appear and pictures may become monochrome during Still Playback. Shuttle Search To allow high-speed search in either direction. Forward Search 1) Press FF during playback. Reverse Search 1) Press REW during playback. [. . . ] For your nearest JVC authorized service center, please call toll free: (800) 252-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. If you have any questions concerning your JVC Product, please contact our Customer Relations Department. WHAT IS NOT COVERED: This limited warranty provided by JVC does not cover: 1. [. . . ]