User manual JVC GR-DF430

[. . . ] 32 ­ 37 DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ­ 39 USING THE OPTIONAL REMOTE CONTROL UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . 40 ­ 44 SYSTEM CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . 45 http://www. jvc-victor. co. jp/english/accessory/ REFERENCES 46 ­ Back Cover DETAILS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · When shooting dark or dim subjects. · When shooting subjects with excessive backlighting. · When shooting scenes with movement in various directions. · When shooting scenes with low-contrast backgrounds. Switch off this mode when recording with the camcorder on a tripod. The " " indicator blinks or goes out if the Stabiliser cannot be used. DIS OFF MANUAL ON : Factory-preset NOTES: Settings made in the " CAMERA" Menu remain effective whether the Power Switch is set to " the menu settings can be changed only when the Power Switch is set to " ". MANUAL" settings are effective only when the Power Switch is set to " ". The " " or " ". However, CONTINUED ON NEXT PAGE 34 EN TELE MACRO OFF ON WIDE MODE OFF CINEMA USING MENUS FOR DETAILED ADJUSTMENT (cont. ) Usually the distance to a subject where the lens is in focus depends on the zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting. When set to "ON", you can shoot a subject as large as possible at a distance of approx. Demonstration starts in the following cases: · When the Menu Screen is closed after "DEMO MODE" is turned "ON". · With "DEMO MODE" set to "ON", if there is no operation for about 3 minutes after the Power Switch is set to " " or " " . Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume. NOTES: If a tape is in the camcorder, the demonstration cannot be turned on. "DEMO MODE" remains "ON" even if the camcorder power is turned off. If "DEMO MODE" remains "ON", some functions will not be available. After viewing demo, set to "OFF". SYSTEM CAM RESET ON SCREEN CANCEL EXECUTE LCD LCD/TV Does not reset all settings to the factory-preset. Resets all settings to the factory-preset. Keeps the camcorder's display (except the date, time and time code) from appearing on the connected TV screen. Makes the camcorder's display appear on screen when the camcorder is connected to a TV. [. . . ] 19 CONTINUED ON NEXT PAGE G Gain Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grip Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 S Self-Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Sepia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]