User manual JVC GR-DVF1

[. . . ] DIGITAL CAMCORDER GR-DVF1 Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/index-e. html CONTENTS PROVIDED ACCESSORIES ABOUT DV GETTING STARTED 4 5 6 ­ 13 Power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Clock (Lithium) Battery Insertion/Removal . . . 8 Date/Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Loading/Unloading A Cassette . . . . . . . . . . . . . . [. . . ] When playing back a tape recorded at 48 kHz, set in the same manner. For information on output sound during Audio Dubbing, see page 55. NOTES: You can also use the provided RM-V712U remote control's AUDIO MONITOR button to change the output sound (without having to access the Playback Menu). Make sure you point the remote control at the camcorder's remote sensor. During playback, the camcorder detects the sound mode in which the recording was made. This detection cannot be made during fast-forward or rewind. During playback the sound mode is displayed in the upper left corner. Display Minutes Seconds DEC 25 ' 98 PM 5 : 30 TIME CODE (Displaying The Time Code During Playback) You can display the Time Code on screen during playback. This function is preset to "OFF". To turn it on, select "TIME CODE" at the Playback Menu and change the setting ( pg. ON­ The Time Code is displayed on the playback screen. OFF­ The Time Code does not appear. Frames* TC 12 : 34 : 24 *25 frames = 1 second DISPLAY (Displaying the Date During Playback) TC 12 : 34 : 24 25 . 99 16 : 40 If the time has been set, the date is automatically recorded separately from the recorded video signal. You can display or remove the date anytime during playback. This function is preset to "ON". To turn it off, select "DISPLAY" at the Playback Menu and change the setting ( pg. ON­ The date is displayed on the playback screen. OFF­ The date is not displayed. 40 EN PLAYBACK Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. A. Connection to a TV or VCR equipped with a SCART connector compatible only with regular video signal Use the provided Audio/Video (A/V) cable. Cable Adapter (provided) A/V cable (provided) Yellow to Video Output White to Audio Output L Red to Audio Output R White to AUDIO L Red to AUDIO R Yellow to VIDEO To TV or VCR TV VCR Connector cover* Set to CVBS B. Connection to a TV or VCR equipped with a SCART connector compatible with Y/C signal Use the provided Audio/Video (A/V) cable and S-Video cable. A/V cable (provided) Yellow: not connect White to Audio Output L Red to Audio Output R Yellow: not connect White to AUDIO L Red to AUDIO R Cable Adapter (provided) To TV or VCR TV VCR Connector cover* To S-VIDEO OUT S-Video cable (provided) Set to Y/C To S -IN C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors Use the provided Audio/Video (A/V) cable and S-Video cable. the S-Video Yellow to Video Output Whenis not used. Yellow to VIDEO IN cable ( ) To TV or VCR White to Audio Output L Red to Audio Output R A/V cable (provided) White to AUDIO L IN Red to AUDIO R IN TV Connector cover* To S-VIDEO OUT S-Video cable (provided) To S-VIDEO IN VCR * When connecting the cables, open this cover. EN41 1 CONFIRM POWER-OFF STATUS 2 CONNECT CAMCORDER TO TV OR VCR Make sure the camcorder's power is off. NOTES: Pull out the connector cover and open it. Connect as shown in the illustration ( pg. [. . . ] in places where humidity is extremely low. (below 35%) or extremely high (above 80%). drop the unit or strike it against hard objects. subject it to shock or excessive vibration during transportation. [. . . ]