User manual JVC GR-DVL100

[. . . ] ENGLISH CONTENTS DIGITAL VIDEO CAMERA AUTOMATIC DEMONSTRATION 5 GETTING STARTED 6 ­ 11 RECORDING 12 ­ 28 Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 GR-DVL300 GR-DVL107 GR-DVL100 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html PLAYBACK 29 ­ 35 29 30 32 34 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press 4/6 on the camcorder and engage the video unit's Record mode. Engage the video unit's Record-Pause mode and press 4/6 on the camcorder. Repeat steps 4 through 6 for additional editing, then stop the video unit and camcorder when finished. Core filter DV cable* To DV IN Video unit equipped with DV connector * Provided with GR-DVL107 only. ** When connecting the cable, open this cover. NOTES: It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units. For Digital Dubbing, this camcorder can be connected only to one device at a time. If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again. 41), "Playback Special Effects" ( pg. 42) or "Snapshot" is attempted during playback, only the original playback image recorded on the tape is output from the DV OUT connector. For GR-DVL300/DVL100 Owners: When using a DV cable, be sure to use the optional JVC VC-VDV204U DVcable. 38 EN DUBBING (cont. ) Dubbing From A Video Unit Equipped With A DV Connector (Digital Dubbing) [To use this camcorder as a recorder: Only for GR-DVL107 owners] 1 Power Switch Connector cover* To DV IN Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration. Set "REC MODE" to "SP" or "LP" in the Menu Screen depending on your preference ( pg. Set this camcorder's Power Switch to " " while pressing down the Lock Button located on the switch. Turn on the video unit's power and insert the appropriate cassettes in the camcorder and the video unit. Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode. Engage the video unit's Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point. Press the Recording Start/Stop Button on the camcorder to engage the Record mode. To stop dubbing, press the Recording Star/Stop Button on the camcorder so that "DV. IN" reappears, then engage the video unit's Stop mode. Repeat steps 5 through 7 for additional editing. Core filter 2 3 4 5 6 7 DV cable (provided) To DV OUT Video unit equipped with DV output connector 8 * When connecting the cable, open this cover. NOTES: It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( pg. [. . . ] 22 Wind Cut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25 Wipe In/Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S Self-Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Sepia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Set Remote Control/VCR Code . . . . . . . . . . . . . . . . . . [. . . ]