User manual JVC GR-DVL105

[. . . ] ENGLISH CONTENTS DIGITAL VIDEO CAMERA AUTOMATIC DEMONSTRATION 5 GETTING STARTED 6 ­ 11 RECORDING 12 ­ 28 Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 GR-DVL105 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html PLAYBACK 29 ­ 35 29 30 32 34 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Set "REC MODE" to "SP" or "LP" in the Menu Screen depending on your preference ( pg. Set this camcorder's Power Switch to " " while pressing down the Lock Button located on the switch. Turn on the video unit's power and insert the appropriate cassettes in the camcorder and the video unit. Press the Recording Start/Stop Button on the camcorder to engage the Record-Pause mode. Engage the video unit's Play mode, then engage the Still Playback mode when you have found a spot just before the edit-in point. Press the Recording Start/Stop Button on the camcorder to engage the Record mode. To stop dubbing, press the Recording Star/Stop Button on the camcorder so that "DV. IN" reappears, then engage the video unit's Stop mode. Repeat steps 5 through 7 for additional editing. 2 3 4 5 6 7 8 Core filter DV cable (optional) To DV OUT Video unit equipped with DV output connector * When connecting the cable, open this cover. NOTES: It is recommended to use the AC Power Adapter/Charger as the power supply instead of the battery pack ( pg. If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units. For Digital Dubbing, this camcorder can be connected only to one device at a time. If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. Even though the DV cable is connected correctly, sometimes the image may not appear in step 5. If this occurs, turn off the power and make connections again. Digital Dubbing is performed in the sound mode recorded on the original tape, regardless of the current "SOUND MODE" setting ( pg. During Digital Dubbing, no signals are output from the video or audio connectors. When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. USING THE REMOTE CONTROL UNIT 1 3 EN39 The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. Tab Installing The Batteries The remote control uses two "AAA (R03)" size batteries. See "General Battery Precautions" ( pg. 63). 2 ­ + + ­ 1 2 3 Remove the battery compartment cover while pushing up the tab as illustrated. Insert two "AAA (R03)" size batteries in the correct direction. [. . . ] 26 Sepia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Set Remote Control/VCR Code . . . . . . . . . . . . . . . . . . 43 Shuttle Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]