User manual JVC GR-DVL140

[. . . ] ENGLISH CONTENTS DIGITAL VIDEO CAMERA AUTOMATIC DEMONSTRATION GETTING STARTED 6 7 ­ 14 GR-DVL140 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html BASIC RECORDING & PLAYBACK 15 ­ 23 BASIC RECORDING . . . . . . . . . . . . 16 ­ 19 BASIC PLAYBACK . . . . . . . . . . . . . . 20 ­ 23 ADVANCED FEATURES 24 ­ 52 ­ 33 ­ 39 ­ 41 ­ 50 ­ 52 FOR RECORDING . . . . . . . . . . . . . . . . 25 USING MENUS FOR DETAILED ADJUSTMENT . . . . . . [. . . ] Press 4/6 on the camcorder and engage the VCR's Record mode. Engage the VCR's Record-Pause mode and press 4/6 on the camcorder. Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. To S Audio/Video cable [mini-plug to RCA plug] (provided) S-Video cable (optional) 3 4 5 6 7 To AUDIO, VIDEO* -IN connectors and Cable Adapter (provided) If your VCR has a SCART connector, use the provided cable adapter. "Y/C"/"CVBS" video out select switch VCR TV * Connect when an S-Video cable is not used. ** When connecting the cables, open this cover. NOTES: As the camcorder starts to play your footage it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes. Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. Set the video out select switch of the cable adapter as required: Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable. CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable. To choose whether or not the following displays appear on the connected TV . set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen ( pg. set "TIME CODE" to "ON" or "OFF" in the Menu Screen ( pg. ·Playback Sound Mode, Tape Speed And Tape Running Displays . . . . set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu Screen ( pg. 38). EN41 Dubbing To A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. To DV OUT Lock Button Core filter PL 1 OFF AY Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration. Set the camcorder's Power Switch to " " while pressing down the Lock Button located on the switch, turn on the video unit's power, and insert the appropriate cassettes in the camcorder and the video unit. While watching the playback on the monitor, engage the DV connector-equipped video unit's record mode from the spot on the source tape you want to begin recording. 2 3 4 DV cable (optional) Power Switch Core filter To DV IN Video unit equipped with DV input connector NOTES: It is recommended to use the AC Adapter as the power supply instead of the battery pack ( pg. If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again. [. . . ] 17 Sepia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Set Remote Control/VCR Code . . . . . . . . . . . . . . . . . . Shuttle Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]