User manual JVC GR-DVL517

[. . . ] ENGLISH CONTENTS AUTOMATIC DEMONSTRATION 6 7 ­ 14 DIGITAL VIDEO CAMERA GETTING STARTED GR-DVL817 GR-DVL517 GR-DVL515 GR-DVL317 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): VIDEO RECORDING & 15 ­ 24 PLAYBACK VIDEO RECORDING . . . . . . . . . . . . 16 ­ 20 VIDEO PLAYBACK . . . . . . . . . . . . . . 21 ­ 24 DIGITAL STILL CAMERA (D. S. C. ) RECORDING & PLAYBACK 25 ­ 36 D. S. C. 28 ­ 36 ADVANCED FEATURES 37 ­ 69 ­ 45 ­ 51 ­ 55 ­ 67 ­ 69 http://www. jvc-victor. co. jp/english/index-e. html FOR RECORDING . . . . . . . . . . . . . . . . [. . . ] set "DATE/TIME" to "AUTO", "ON" or "OFF" in the Menu Screen ( pg. set "TIME CODE" to "ON" or "OFF" in the Menu Screen ( pg. ·Playback Sound Mode, Tape Speed And Tape Running Displays . . . . set "ON SCREEN" to "LCD" or "LCD/TV" in the Menu Screen ( pg. Or, press DISPLAY on the remote control (provided with GR-DVL817 only). In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder. Be sure to use the YTU94146A S-Video cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. 60) or Playback Special Effects (GR-DVL817 only, pg. 59) in step 5. EN53 VIDEO/DSC Switch (GR-DVL817 only) Dubbing To Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. [To use this camcorder as a player] To DV IN/OUT Lock Button Core filter PL 1 OFF AY Make sure all units are turned off. Connect the camcorder to a video unit equipped with a DV input connector using a DV cable as shown in the illustration. Set the VIDEO/DSC Switch to "VIDEO" (GR-DVL817 only), set the camcorder's Power Switch to " " while pressing down the Lock Button located on the switch, turn on the video unit's power, and insert the appropriate cassettes in the camcorder and the video unit. While watching the playback on the monitor, engage the DV connector-equipped video unit's record mode from the spot on the source tape you want to begin recording. 2 3 4 DV cable (optional) Power Switch Core filter To DV IN/OUT Video unit equipped with DV connector PLAY (4) STOP (5) NOTES: It is recommended to use the AC Adapter as the power supply pg. instead of the battery pack ( If the remote control is used when both the player and recorder are JVC video units, both units will perform the same operation. To prevent this from happening, press the buttons on both units. If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed. Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again. 60), "Playback Special Effects" (GR-DVL817 only, pg. [. . . ] 39 Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slow-Motion Playback . . . . . . . . . . . . . . . . . . . . . . . . 21, 59 Slow Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 42 Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]