User manual JVC GR-DVL9000EK

[. . . ] 80 ­ 85) and familiarise yourself with button locations, etc. read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely important information regarding the safe use of this product. You are recommended to carefully read the cautions on pages 74 through 76 before use. SAFETY PRECAUTIONS IMPORTANT (for owners in the U. K. ) Connection to the mains supply in the United Kingdom. [. . . ] The indicator is displayed and the subject is brightened. If pressed again, disappears and the brightness returns to the previous level. Using the BACK LIGHT Button may cause the light around the subject to become too bright and the subject to become white. Backlight compensations is also available when the Power Switch is set to "A". Manual White Balance Adjustment Adjust the white balance manually when shooting under various types of lighting. White paper White Balance Adjustment The white balance that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colour s will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour /tint reproduction. (Factory-preset: AUTO) AUTO: White balance is adjusted automatically. MWB: Adjust the white balance manually when shooting under various types of lighting. ( "Manual White Balance Adjustment") FINE: Outdoors on a sunny day. HALOGEN: A video light or similar type of lighting is used. If "5S" is set to "5S" or "Anim. " in MANUAL Menu, the NAVIGATION function will not work properly. To make thumbnail images during video recording automatically 1 2 3 4 5 Load a cassette. ( Set the VIDEO/MEMORY Switch to "VIDEO". Set the Power Switch to "A" or "M" while pressing down the Lock Button located on the switch. Set "NAVIGATION" to the desired navigation storing time. 31, 35) If the " " indicator appears blinking on the screen, wait until it stops blinking. If it does not stop blinking after a while, check if a memory card is loaded. Press the Recording Start/Stop Button to start recording. To find scenes on tape using thumbnail images (NAVIGATION Search) 1 2 3 4 5 Load a cassette. ( Set the VIDEO/MEMORY switch to "VIDEO". Set the Power Switch to "PLAY" while pressing down the Lock Button located on the switch. Press NAVI during video playback or stop mode. The loaded cassette's NAV I GA T I ON 2 25 03 NAVIGATION thumbnail DATE :: 1 4 :. [. . . ] 37, 41 VIDEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 VIDEO DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Motor Drive Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 MultiMediaCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]