User manual JVC GR-DVM70U

[. . . ] DIGITAL VIDEO CAMERA GR-DVM70 ENGLISH Please visit our CyberCam Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html For Customer Use: Enter below the Model No. which is located on the bottom of cabinet. Retain this information for future reference. INSTRUCTIONS Model No. Serial No. LYT0384-001A EN 2 EN Dear Customer, Thank you for purchasing this digital video camera. [. . . ] •If you exit before selecting all 4 images, the MultiImage screen is canceled. EXIT 001 F MULTI 002 S 003 E 004 F 005 F 006 F 7 END MULTI-IMAGE SCREEN OR Multi-Image screen Set “MULTI VIEW” to “OFF” in the Playback Menu. Press 3 or 2 to display another image. NOTE: If you wish to change the still images which make up the Multi-Image screen, go back to normal playback and change the “MULTI VIEW” setting in the Playback Menu. 62 EN PLAYBACK Advanced Features For D. S. C. (cont. ) Protecting Images The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality Mode indication, that image cannot be deleted. 1 SELECT OPERATION MODE •A stored image is displayed. Lock Button Set the Power Switch to “ ” while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully. MENU/SET Dial Display INDEX SLIDE SHOW MULTI VIEW IrTran-P 4 PROTECT FILE DELETE TITLE DELETE FORMAT END OFF OFF EXIT 001 F PROTECT 002 S 003 E 004 F 005 F 006 F Normal playback PLAY OFF CAME /PC 5S RA DSC DS Power lamp 2 ACCESS PLAYBACK MENU 3 SELECT FUNCTION TO PROTECT AN IMAGE Press MENU/SET. Rotate MENU/SET to move the highlight bar to “PROTECT” and press it. The PROTECT Index Screen appears. Power Switch Playback Menu PROTECT Index Screen LAY CP Before doing the following, perform steps 1 through 3 above. 4 SELECT IMAGE Rotate MENU/SET to move the green frame to the desired image and press it. A “ ” padlock mark appears on the selected image. Repeat this procedure for all images you do not wish to delete by accident. Rotate MENU/SET upward to select “EXIT” and press it. The normal playback screen appears. 5 END SELECTION NOTE: When the memory is initialized or corrupted, even protected images are deleted. If you do not want to lose important images, we recommend you to transfer them to a PC and save them. Padlock mark EN TO REMOVE PROTECTION 63 Before doing the following, perform steps 1 through 3 (੬ pg. 62). 4 SELECT IMAGES MENU/SET Dial Rotate MENU/SET to move the green frame to the desired image and press it. The “ ” padlock mark located above the image disappears and the image is no longer protected. Repeat this procedure for all images from which you wish to remove protection. Rotate MENU/SET upward to select “EXIT” and press it. The normal playback screen appears. 5 END PROTECTION Display EXIT 001 F PROTECT 002 S 003 E PROTECT Index Screen 004 F 005 F 006 F EXIT 001 F PROTECT 002 S 003 E 004 F 005 F 006 F Normal playback 64 EN PLAYBACK Advanced Features For D. S. C. (cont. ) Deleting Images Previously shot images can be deleted either one at a time or all at once. MENU/SET Dial 1 SELECT OPERATION MODE •A stored image is displayed. Power lamp OFF CAME /PC Set the Power Switch to “ ” while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully. 5S RA DSC DS Lock Button 2 ACCESS PLAYBACK MENU 3 SELECT FUNCTION Press MENU/SET. Rotate MENU/SET to move the highlight bar to “FILE DELETE” and press it. The FILE DELETE Screen appears. LAY CP Power Switch Display INDEX SLIDE SHOW MULTI VIEW IrTran-P PROTECT 4 FILE DELETE TITLE DELETE FORMAT END ALL 4 SELECTED CANCEL NEXT 001 F 004 F 4 EXECUTE CANCEL Normal playback PLAY Playback Menu OFF OFF TO SELECT AN IMAGE BY BROWSING IMAGES STORED IN MEMORY Before doing the following, perform steps 1 through 3 above. 4 SELECT MODE FILE DELETE Screen Rotate MENU/SET to select “SELECTED” and press it. The DELETE Index Screen appears. FILE DELETE 5 SELECT IMAGE Rotate MENU/SET to move the green frame to the desired image that you wish to delete and press it. [. . . ] This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner. ● Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself. Serious malfunctioning Change or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]