User manual JVC GR-DVM80U

[. . . ] ENGLISH CONTENTS AUTOMATIC DEMONSTRATION 7 GETTING STARTED 8 – 15 RECORDING 16– 35 DIGITAL VIDEO CAMERA Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . 22 GR-DVM80 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www. jvc-victor. co. jp/english/index-e. html PLAYBACK 36 – 43 Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Make connections to the device you want to connect to using a DV cable, as shown in the illustration. If necessary, connect the PC connection cable (provided) to the printer’s PC connector and the PC’s RS-232C connector. Turn the camcorder’s POWER Switch to “ PLAY/PC ” while pressing down the Lock Button located on the switch and turn on the other units. Core filter DV cable (optional) Core filter To DV IN connector To DV connector Video unit equipped with a DV input connector To PC connector Core filter PC connection cable (provided) NOTES: ● It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack ( ੬ pg. ● For Digital Dubbing, this camcorder can be connected only to one device at a time. This camcorder can also be used as a recorder ( ੬ pg. ● If Still Playback, Slow-Motion Playback, Fast-Forward or Rewind is attempted with the camcorder connected to a video unit via the DV connector, the image will take on an effect similar to a colored mosaic pattern or it will become black. ● Also refer to the instruction manuals of the connected units. ● When using a DV cable, be sure it has a core filter attached. The core filter reduces interference. Digital Printer To RS-232C PC 44 EN POWER Switch Lock Button DUBBING Dubbing To A VCR 1 2 3 4 5 6 7 Following the illustration, connect the camcorder and the VCR. Set the camcorder’s POWER Switch to “ PLAY/PC ” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR. Engage the VCR’s AUX and Record-Pause modes. Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder. Press 4/6 on the camcorder and engage the VCR’s Record mode. Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder. Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished. To S-VIDEO OUT Red to AUDIO R OUT White to AUDIO L OUT Yellow to VIDEO OUT* Core filter Audio/Video cable [RCA plug to RCA plug] (optional) S-Video cable (optional) White to AUDIO L IN Yellow to VIDEO IN* Red to AUDIO R IN To S-VIDEO IN VCR NOTES: ● The S-Video cable and Audio/Video cable (RCA plug to RCA plug) are optional. Be sure to use the following: • S-Video cable: YTU94146A • Audio/Video cable (RCA plug to RCA plug): YTU94147A Consult the JVC Service Center described on the sheet included in the package for details on their availability. Make sure to connect the ends with a core filter to the camcorder. ● You can use the AV OUT connector on the camcorder for connection. 48) or Playback Special Effects ( ੬ pg. ● Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape. TV * Connect when an S-Video cable is not used. To choose whether or not the following displays appear on the connected TV . [. . . ] 33 Set Remote Control/VCR Code . . . . . . . . . . . . . . . . . . 50 Shuttle Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Shutter Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Slow-Motion Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]