User manual JVC GR-FXM383

[. . . ] INSTRUCTIONS ENGLISH LYT0860-001C COMPACT VHS CAMCORDER GR-SXM58 GR-SXM48 GR-FXM383 GR-FXM38 GR-SX24 GR-FX14 625 VHS PAL S-VHS is compatible with GR-SXM58/SXM48/SX24 only EG Printed in Malaysia 1001MKV UN PJ ** COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. 3, 4) to ensure safe use of this product. "PRECAUTIONS" ( AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when "DEMO MODE" is set to "ON" (factory-preset). · Available when the Power Switch @ is set to " " or " ". · Performing any operation during the demonstration stops the demonstration temporarily. [. . . ] 2) Press and hold either RETAKE % or & to reach the start point for new recording. Pressing 3 & forwards the tape and pressing 2 % reverses it. 3) Press the Recording Start/Stop Button !· Noise bars appear and pictures may become monochrome or darken during Retake. This is normal. 13 Tracking Eliminates noise bars that appear on-screen during playback. To activate Manual Tracking: 1) Press the TRACKING Wheel 1 for approx. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear. · To return to Auto Tracking, press the TRACKING Wheel 1 for approx. 2 seconds or set the Power " again. "AT" : Switch @ to "OFF" and then " blinks. When Auto Tracking finishes, the indication disappears. · When noise bars appear during playback, the camcorder enters the Auto Tracking mode and "AT" : appears. · Manual Tracking may not work with tapes recorded on other VCRs or camcorders. Counter Memory Makes it easier to locate a specific tape segment. 1) Press COUNTER R/M ) and hold for more than 1 second. The counter J resets to "0:00:00". 2) Press COUNTER R/M ) for less than 1 second. 3) After recording or playback, press 5 $, then 2 %. The tape automatically stops at or close to 0:00:00. · The counter memory functions in the FastForward and Rewind modes. · To disable the counter memory function, press COUNTER R/M ) for less than 1 second so that "M" disappears. Playback Special Effects (GR-SXM58/SXM48/SX24 only) TBC (Time Base Corrector) Removes jitter from fluctuating video signals to deliver a stable picture even with old tapes. To activate/release the TBC mode, press TBC 4 during playback for more than 1 second. When the TBC mode is activated, "TBC" F is displayed. [. . . ] · If you leave power on for a long time, the surface around the LCD monitor becomes hot. 4 Close and lock the LCD monitor*. 5 Slide BATTERY RELEASE to remove the battery pack. 6 Attach the provided lens cap to the camcorder's lens. 2. Cleaning The Camcorder 1 Wipe gently the exterior with a soft cloth. [. . . ]