User manual JVC GR-FXM404

[. . . ] INSTRUCTIONS ENGLISH LYT1201-001A COMPACT VHS CAMCORDER GR-SXM50 GR-FXM404 GR-FXM40 GR-SX26 GR-FX16 S-VHS is compatible with GR-SXM50/SX26 only EX 625 VHS PAL Printed in Malaysia 1003-AS-YL-PJ COPYRIGHT© 2003 VICTOR COMPANY OF JAPAN, LTD Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. 3, 4) to ensure safe use of this product. "PRECAUTIONS" ( AUTOMATIC DEMONSTRATION Automatic Demonstration takes place when "DEMO MODE" is set to "ON" (factory-preset). · Available when the Power Switch @ is set to " " or " " while pressing down the Lock Button !· Performing any operation during the demonstration stops the demonstration temporarily. [. . . ] 1 second and played back automatically, then pauses in Record­Standby mode for the next shot. · Distortion may occur at the start of playback. This is normal. Retake To re-record certain segments. 1) Make sure the camcorder is in the Record­ Standby mode. 2) Press and hold either RETAKE * or e to reach the start point for new recording. Pressing 3 * forwards the tape and pressing 2 e reverses it. 3) Press the Recording Start/Stop Button 0 to start recording. · Noise bars appear and pictures may become monochrome or darken during Retake. This is normal. 13 Tracking Eliminates noise bars that appear on-screen during playback. To activate Manual Tracking: 1) Press the TRACKING Wheel 1 for approx. 2) Rotate the TRACKING Wheel 1 so that the noise bars disappear. · To return to Auto Tracking, press the TRACKING Wheel 1 for approx. 2 seconds or set the Power " again. "AT" z Switch @ to "OFF" and then " blinks. When Auto Tracking finishes, the indication disappears. · When noise bars appear during playback, the camcorder enters the Auto Tracking mode and "AT" z appears. · Manual Tracking may not work with tapes recorded on other VCRs or camcorders. Counter Memory Makes it easier to locate a specific tape segment. 1) Press COUNTER R/M w and hold for more than 1 second. The counter K resets to "0:00:00". 2) Press COUNTER R/M w for less than 1 second. 3) After recording or playback, press 5 r, then 2 e. The tape automatically stops at or close to 0:00:00. [. . . ] Put cloth in diluted mild soap and wring it well to wipe off heavy dirt, then wipe again with a dry cloth. 2 Open the LCD monitor* and wipe it gently with a soft cloth. Close the LCD monitor*. 3 Blow the lens with a blower brush, then wipe it gently with lens cleaning paper. 4 Turn the eyepiece counterclockwise and pull it out. 5 Remove dust from the viewfinder using a blower brush. 6 Re-attach the eyepiece and turn it clockwise. * Applicable models only. . . . . [. . . ]