User manual JVC GR-SXM250US-GR-SXM250

[. . . ] INSTRUCTIONS ENGLISH LYT1078-001A COMPACT VHS CAMCORDER GR-SXM250 For Customer Use: Enter below the Model No. which is located on the bottom of the camcorder. Retain this information for future reference. COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD US Printed in Malaysia 1102-DY-YL-PJ Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. [. . . ] · If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture. · The S-Video cable connection can improve the dubbed picture quality. Be sure to use the following cable: YTU91146A S-Video cable. Consult the JVC Service Conter described on the sheet included in the package for details on its availability. Make sure to connect the end with a core filter to the camcorder. The core filter reduces interference. Tape Dubbing 1) Connect the camcorder and the VCR ( "Connections To A TV/VCR"). Set the Power Switch @ to "PLAY" while pressing down the Lock Button !located on the switch, turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR. Engage the VCR's AUX and Record-Pause modes. 2) Press 4/6 & to find a spot just before the editin point. Once it is reached, press 4/6 & again. 3) Press 4/6 & and engage the VCR's Record mode. 4) Engage the VCR's Record-Pause mode and press 4/6 &. · Repeat steps 2) through 4) for additional editing, then stop the VCR and camcorder when finished. To S-Video Output 5 White to Audio Output 6 Yellow to Video Output 7 Connector cover S-Video cable (optional) A/V cable (optional) TV White to Audio Input VCR Yellow to Video Input To S-Video Input 15 Using The Cassette Adapter Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a S-VHS/ VHS VCR. 1) Slide the battery cover up to remove it, install one "AA (R6)" size battery, then reattach the cover. 2) Slide the latch to open the compartment door, then insert the cassette and close the compartment door. 3) Load the cassette adapter into the VCR and play the tape back. 4) Slide the latch and the compartment door opens automatically. Do not attempt to force the adapter open. Then, insert your finger in the hole, and push up and remove the cassette. · During tape loading and unloading, do not touch the reels for safety and tape protection. · Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. [. . . ] Por lo tanto, cuando abra el monitor LCD y lo incline hacia arriba hasta 180°, no será posible visualizar ninguna imagen en el visor, sin embargo, podrá filmarse a si mismo mientras visualiza su propia imagen en el monitor LCD. 2) Presione el botón de inicio/parada de grabación 0. P aparece mientras la grabación está en progreso. · Para interrumpir la grabación, presione el botón de inicio/parada de grabación 0. [. . . ]