User manual JVC GR-SXM920U

[. . . ] 30 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Using The Cassette Adapter . . . . . . . . . . . 34 USING THE REMOTE CONTROL UNIT (GR-SXM607/SXM57/ SX202 only) 35 ­ 43 Playback Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] A subject can be shot under various types of lighting conditions indoors (natural, flourescent, candlelight, etc. ). Because the colour temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. Once you adjust white balance manually, the setting is retained even if the power is turned off or the battery removed. 30 EN PLAYBACK Basic Playback Stop (5) Button Rewind (2) Button Play/Pause (4/6) Button Fast-Forward (3) Button BRIGHT* Wheel Power Zoom Lever (VOL. *) 1 2 Load a tape ( pg. 13). Set the Power Switch to " ". ·Press 2 to rewind, or 3 to fast-forward the tape during Stop mode. Speaker* Set to " ". * Models equipped with LCD monitor only. NOTES: The camcorder shuts off automatically after about 5 minutes in Stop mode. To turn on again, set the Power Switch to "OFF", then to " ". When the Power Switch is set to " " and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power (models equipped with LCD monitor only). The playback picture can be viewed in the viewfinder (with the LCD monitor* shut), on the LCD monitor* or on a connected TV ( pg. * Models equipped with LCD monitor only. You can also view the playback picture on the LCD monitor with it flipped over and retracted (models equipped with LCD monitor only). Manual Tracking may not work with tapes recorded on other VCRs or camcorders. TBC (Time Base Corrector): Removes jitter from fluctuating video signals to deliver a stable picture even with old tapes. To activate/release the TBC mode, press TBC during playback for more than 1 second. When the TBC mode is activated, "TBC" is displayed. Counter Memory Function: Makes it easier to locate a specific tape segment. 1) Press COUNTER R/M and hold for more than 1 second. The counter resets to "0:00:00". 2) Press COUNTER R/M for less than 1 second. 3) After recording or playback, press 5, then 2. The tape automatically stops at or close to 0:00:00. The counter memory functions in the Fast-Forward and Rewind modes. [. . . ] 2 CLEAN LCD MONITOR Open the LCD monitor and wipe it gently with a soft cloth. 3 CLEAN LENS Blow it with a blower brush, then wipe it gently with lens cleaning paper. 4 REMOVE EYEPIECE Turn the eyepiece counterclockwise and pull it out. 5 CLEAN VIEWFINDER Remove dust using a blower brush. [. . . ]