User manual JVC GV-SP2

[. . . ] DIGITAL SYSTEM PRINTER GV-SP2 ENGLISH INSTRUCTIONS LYT0546-001A EN Dear Customer, Thank you for purchasing this Digital System Printer. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual ·All major sections and subsections are listed in the Table Of Contents ( pg. ·Notes appear after most subsections. [. . . ] Use a different AC outlet from the one used for the TV and VCR. AC adapter · Carefully check the orientation of the 5 mark on the printer cable and connect it to the video equipment. To printer output connector Plug the power cord into the AC outlet. The 5 mark side facing up Ferrite core Printer To PRINT DATA input connector Printer cable Ferrite core The 3 mark side facing down Read the instruction manual for the equipment to connect. The equipment you are using has a dedicated printer output connector. Refer to the instruction manual for the equipment when connecting it to the printer. USING THE STAND Use the stand when cramped for space EN 11 If there is not enough space to lay the printer flat, you may attach the printer vertically to the supplied stand. Attach so that holes A are aligned with parts B as shown. Cover screw hole A B B A Front Stand surface 12 EN CLEARING PAPER JAM Clearing a Paper Jam If a paper jam occurs, turn the printer off, and then turn it back on again. When the power is turned on, the printer checks the position of the paper and automatically performs a reset operation, ejecting any paper inside the printer. If turning on the printer again does not eject the jammed paper, turn the printer off again. If repeating this operation several times still does not clear the jammed paper, it will be necessary either to remove the paper yourself or else to contact your JVC dealer. If you can see the jammed paper: · If you can see the jammed paper in the paper outlet on the top of the printer, turn off the printer, unplug the power cord, and then use a narrow grasping tool, such as a pair of tweezers, to grasp the paper and pull it out. In some cases the ink sheet will be adhering to the paper; pull both out carefully. · If the ink sheet is stuck on the paper, slowly peel the ink sheet from the paper, and then slowly remove the ink cassette from the printer. · If the ink sheet is not damaged, you can continue to use the ink cassette after taking up the slack in the ink sheet. However, it is possible that the next print made with this ink cassette may not come out well. · If the ink sheet is damaged, the ink cassette can not be used anymore. · If you can see the jammed paper in the paper tray inlet, etc. , but are not able to remove it, do not continue attempting to remove the paper. If you can not see the jammed paper: · If you do not know where the paper is jammed or if the paper tray is stuck, do not attempt to remove the paper. Instead, contact your JVC dealer. EN 13 PC PRINTER EDITION for Windows® · Additional information regarding setup and information not contained in the instruction manual can be found in the file readme. txt. Please read this file before installing the accompanying software. · For the latest information regarding this software, please visit our website at http://www. jvc-victor. co. jp/. Operating Environment The host computer running the Windows® operating environment must satisfy the following four conditions. Be a PC with Windows® 98 installed 2. Be warranted for USB operations by the computer manufacturer 4. Have 32 MB or more of RAM, 256-color or better video, and have an MMX 150-MHz or better CPU NOTE: There are variations of the USB interface in various brands of personal computers. Therefore JVC cannot guarantee that your computer will be compatible with this printer. * Windows® 98 is a registered trademark of Microsoft Corporation in the US and other countries. Connecting the USB Cable Attach the supplied ferrite core to the USB cable. [. . . ] Load the image into the personal computer first, and then initiate the printing operation. This message is displayed when communication has become impossible due to a faulty USB cable connection or for some other reason while sending an image to the printer. Check the USB cable connection and try printing again. To stop printing while printing is in progress, click Stop. [. . . ]