User manual JVC GY-HD101

[. . . ] E INTRODUCTION CONTROLS, INDICATORS AND CONNECTORS PREPARATIONS PREPARATIONS FOR OPERATION SETTING AND ADJUSTMENTS BEFORE SHOOTING SHOOTING OPERATION HD CAMERA RECORDER PLAYBACK MODE GY-HD100 GY-HD101 INSTRUCTIONS USING EXTERNAL COMPONENTS MENU SCREENS FEATURES OF THE CAMERA SECTION OTHERS Thank you for purchasing this JVC product. Before operating this unit, please read the instructions carefully to ensure the best possible performance. For Customer Use : Enter below the Serial No. Retain this information for future reference. [. . . ] · The VIDEO FORMAT menu screen is displayed. the SHUTTER dial and bring the cursor (K) to the FRAME RATE item and press the SHUTTER dial. · The setting for the selected item flashes and can be changed. "CHANGE THE SYSTEM" is displayed on the screen. · The setting stops flashing and is temporarily set. · Move the cursor (K) to the EXECUTE item and EXECUTE flashes. SYSTEM CHANGE" is displayed on the screen and after a few seconds the system is rebooted. 4. Turn the SHUTTER dial, change the setting and push the STATUS button 5. Push the SHUTTER dial. Setting the REC Item Set the REC item using the same steps as for the FRAME RATE item. MEMO · If you change the FRAME RATE item setting, the system is rebooted. · The synchronous video signal is momentarily disturbed when the REC item setting is switched. About the Motion Smooth Function When you set the MOTION SMOOTH item on the CAMERA PROCESS [2/2] menu screen to ON with the REC item set to HDV-HD30P, HDV-HD25P or HDV-HD24P, the video can be played back more smoothly than with normal progressive video. This function is only enabled during playback. It is not available during live output or shooting. 44 SETTING AND ADJUSTMENTS BEFORE SHOOTING Camera Settings 1. Set the lens' iris mode switch to "A" (Auto iris side). Select the ND filter. VTR indicator A. BAL] (Auto White Balance) switch: Set to A or B. ND FILTER OFF 1 2 OFF 1/4ND 1/16ND Suitable Location Indoors, dark outdoors Outdoors under clear sky Outdoors under extremely clear sky 4. Set the shutter speed to OFF with the SHUTTER dial. CAM/VTR button Screen Size (4:3/16:9) Mode Selection ASPECT item 4:3 4:3 TV The screen size of recorded images can be selected with the ASPECT item on the VIDEO FORMAT menu screen. · To record using the standard screen, set ASPECT to 4:3. · To record using the 16:9 screen, set ASPECT to 16:9. 16:9 TV MEMO · When you set the REC item on the VIDEO FORMAT menu to HDV format, the ASPECT item is fixed at 16:9 and "[16:9]" is displayed. · In the SAFETY ZONE item on the LCD/VF [1/3] menu screen, you can display the safety zone for a standard screen as well as a 16:9 screen in the viewfinder or LCD monitor. · When the ASPECT item is set to 4:3, the screen that is displayed may differ depending on the 16:9 television you are using. 16:9 4:3 TV 16:9 TV 45 SETTING AND ADJUSTMENTS BEFORE SHOOTING Audio Input Signal Selection CH-2 INPUT switch The GY-HD100 is provided with the INPUT1 connector and the INPUT2 connector for audio input. Select the audio from the INPUT1 connector or the INPUT2 connector using the CH-2 INPUT switch for the audio to be recorded in CH-2. Selecting the CH-2 channel input connector AUDIO INPUT switch Select using the CH-2 INPUT switch. [. . . ] X See page 7. Drum usage hours (h) 1. Press the STATUS button for at least 1 second to display 3. Turn the SHUTTER dial, select the OTHERS. . Select the NEXT PAGE item on the OTHERS [1/2] menu press the SHUTTER dial. [. . . ]