User manual JVC GZ-MC100EK

[. . . ] ENGLISH GETTING STARTED Basic Edition DIGITAL MEDIA CAMERA 6 19 GZ-MC100 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set "DEMO MODE" to "OFF". 26) INSTRUCTIONS This instruction manual describes the basic operations of the camera. For more information, read the advanced operation manual provided as HTML format in the CD-ROM. See page 32 for details. LYT1341-001B EN 2 EN Major Features of this Camera Removable hard disk In contrast to conventional digital video cameras that record to DV tapes, the removable hard disk is a new type of card media that enables extended hours of highresolution, MPEG2 video recording. [. . . ] 26, 29) Continuous shooting may not work well depending on the recording medium. Lock Button When shooting with the flash, be careful not to cover it. Deleting Files If you press during recording mode, the file recorded most recently will be deleted. However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file. 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select The camera is programmed to record still images on the medium in the CF slot by the factory preset. To switch the recording medium, see pages 26 and 27. To change the image size and picture quality, see pages 26 and 29. . 3 Press the recording start/stop button. The still image is recorded. To check how the image looks before recording, press the recording start/stop button halfway and hold. The indicator appears and stops blinking when the captured image is focused. To cancel the recording, release the recording start/stop button. To record it on the recording medium, press the recording start/stop button fully. BASIC OPERATIONS EN 23 Still Image Playback MODE INFO Zoom Lever Slide Show You can playback all the images stored in recording media automatically. 1 Perform steps 1 ­ 2 in the left column. 2 Press 49 to start the slide show. 3 Lock Button Power Switch 49 To display the next image Normal Playback To display the previous image 5 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. A still image is displayed. To switch the medium to be played back, see pages 26 and 27. . Slide Show Deleting Still Image Files You can select the desired file to be deleted by pressing w e. To delete multiple files at once, see pages 26 and 29. 3 Press 3 to display the previous file. To turn on/off the on-screen display / To check the file information Press INFO repeatedly. To select the file on the index display Slide the zoom lever to W so that the index display appears. Then press rtw e to select the file and press 49. Press 49. , then press rt to select [EXECUTE] and press NOTES: Images shot and stored on the recording media with another device may not be played back correctly. You can zoom in/out or rotate still images. For details, read the advanced operation manual. 32) BASIC OPERATIONS If you press t during the slide show, files are displayed in descending order. If you press r during the slide show, files are displayed in ascending order. To end the slide show, press 49 again. 24 EN BASIC OPERATIONS Voice Recording MODE Zoom Lever Recording Start/Stop Button Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. To change the playback speed, see pages 26 and 30. To switch the medium to be played back, see pages 26 and 27. . 32 Lock Button Power Switch 49 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To check the file information Press INFO when playback is paused. 65 1 Set the power switch to while pressing down the lock button located on the switch. [. . . ] While using the camera, the surface around the LCD monitor and/or the back of the LCD monitor may heat up. If you leave power on for a long time, the surface around the LCD monitor becomes hot. To protect the unit, DO NOT REFERENCES EN 39 How to Handle a CD-ROM Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the centre hole. [. . . ]