User manual JVC GZ-MC100US

[. . . ] MasterPage: Cover GZ-MC100US. book Page 1 Thursday, November 25, 2004 10:44 AM ENGLISH GETTING STARTED Basic Edition DIGITAL MEDIA CAMERA 6 19 GZ-MC100 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set “DEMO MODE” to “OFF”. 26) For Customer Use: Enter below the Model No. which is located on the battery pack mount of the camera. Retain this information for future reference. [. . . ] ● To switch the medium to be played back, see pages 26 and 27. . Slide Show Deleting Still Image Files ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. 3 Press 3 to display the previous file. Press 5 to display the next file. To turn on/off the on-screen display / To check the file information Press INFO repeatedly. To select the file on the index display Slide the zoom lever to W so that the index display appears. Then press rtw e to select the file and press 49. Press 49. , then press rt to select [EXECUTE] and press NOTES: ● Images shot and stored on the recording media with another device may not be played back correctly. ● You can zoom in/out or rotate still images. For details, read the advanced operation manual. 32) BASIC OPERATIONS ● If you press t during the slide show, files are displayed in descending order. ● If you press r during the slide show, files are displayed in ascending order. ● To end the slide show, press 49 again. MasterPage: Body_Left GZ-MC100US. book Page 24 Thursday, November 25, 2004 10:44 AM 24 EN BASIC OPERATIONS Voice Recording MODE Zoom Lever Recording Start/Stop Button Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● To change the playback speed, see pages 26 and 30. ● To switch the medium to be played back, see pages 26 and 27. . 3 2 Lock Button Power Switch 49 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. To check the file information Press INFO when playback is paused. 6 5 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select ● The camera is programmed to record voice on the medium in the CF slot by the factory preset. To switch the recording medium, see pages 26 and 27. ● To change the sound quality and recording level, see pages 26 and 30. To select the file on the index display Slide the zoom lever to W when playback is paused so that the index display appears. Then press rt to select the file and press 49. . Playback Operations High-Speed Search Press 3 or 5 during playback. Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode. 3 Press the recording start/stop button to start recording. 4 To stop recording, press the recording start/stop button Deleting Voice Files again. The camera re-enters the record-standby mode. NOTE: For approximate recording time, see page 43. Press 49. , then press rt to select [EXECUTE] and press Deleting Files If you press during recording mode, the file recorded most recently will be deleted. ● However, if the recording mode (video, still image or voice) is switched or the power is turned off and on again after recording, you cannot delete the file. ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. MasterPage: Basic_Right GZ-MC100US. book Page 25 Thursday, November 25, 2004 10:44 AM BASIC OPERATIONS EN 25 Connecting to a TV or VCR Open the cover. 6 Start playback on the camera. 21) ● Date/Time Set [DATE/TIME] to [AUTO], [ON] or [OFF]. [. . . ] In such cases, first disconnect its power supply unit (battery pack, AC adapter, etc. ) and wait a few minutes and then re-connect it and proceed as usual from the beginning. Declaration of Conformity Model Number : GZ-MC100U Trade Name : JVC Responsible party : JVC AMERICAS CORP. 07470 Telephone Number : 973-317–5000 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian ICES-003. [. . . ]