User manual JVC GZMC100US-GZ-MC100 Instruction Manual

[. . . ] ENGLISH GETTING STARTED 6 19 DIGITAL MEDIA CAMERA GZ-MC100 BASIC OPERATIONS (RECORDING & PLAYBACK) MENU SETTINGS 26 32 REFERENCES To deactivate the demonstration, set "DEMO MODE" to "OFF". 26) For Customer Use: Enter below the Model No. which is located on the battery pack mount of the camera. Retain this information for future reference. [. . . ] The indicator appears and stops blinking when the captured image is focused. To cancel the recording, release the recording start/stop button. To record it on the recording medium, press the recording start/stop button fully. BASIC OPERATIONS EN 23 Still Image Playback MODE INFO Zoom Lever Slide Show You can playback all the images stored in recording media automatically. 1 Perform steps 1 ­ 2 in the left column. 2 Press 49 to start the slide show. 3 Lock Button Power Switch 49 To display the next image Normal Playback To display the previous image 5 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. A still image is displayed. To switch the medium to be played back, see pages 26 and 27. . Slide Show Deleting Still Image Files You can select the desired file to be deleted by pressing w e. To delete multiple files at once, see pages 26 and 29. 3 Press 3 to display the previous file. Press 5 to display the next file. How to use INFO button Press INFO repeatedly. You can display the file information or remove the on-screen display. Press 49. , then press rt to select [EXECUTE] and press NOTES: Images shot and stored on the recording media with another device may not be played back correctly. You can zoom in/out or rotate still images. For details, read the advanced operation manual. 32) BASIC OPERATIONS If you press t during the slide show, files are displayed in descending order. If you press r during the slide show, files are displayed in ascending order. To end the slide show, press 49 again. 24 EN BASIC OPERATIONS Voice Recording MODE Zoom Lever Recording Start/Stop Button Voice Playback 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. To change the playback speed, see pages 26 and 30. To switch the medium to be played back, see pages 26 and 27. . 32 Lock Button Power Switch 49 3 Press 49 to start playback. 4 To pause playback, press 49 again. To adjust the speaker volume During playback slide the zoom lever towards T to turn up the volume, or towards W to turn down the volume. Playback Operations 65 High-Speed Search Press 3 or 5 during playback. Locating the start point of the file or skip the file Press 2 or 6 during playback or pause mode. 1 Set the power switch to while pressing down the lock button located on the switch. 2 Press MODE to select The camera is programmed to record voice on the medium in the SD slot by the factory preset. To switch the recording medium, see pages 26 and 27. To change the sound quality and recording level, see pages 26 and 30. . Deleting Voice Files Press 49. , then press rt to select [EXECUTE] and press You can select the desired file to be deleted by pressing w e. To delete multiple files at once, see pages 26 and 29. 3 Press the recording start/stop button to start recording. 4 To stop recording, press the recording start/stop button again. [. . . ] The camera is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc. ) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC adapter, etc. ) and wait a few minutes and then re-connect it and proceed as usual from the beginning. Declaration of Conformity Model Number : GZ-MC100U Trade Name : JVC Responsible party : JVC AMERICAS CORP. [. . . ]