User manual JVC HM-HDS1U-HM-HDS1

[. . . ] HDD / VHS DUAL RECORDER HM-HDS1U 1 2 1 4 7 < 2 5 8 0 3 6 9 > 3 4 1 2 POWER yyy ;;; yyy ;;; yyy ;;; REC LINK EJECT DIGITPURE TECHNOLOGY HM-HDS1 STOP PLAY PAUSE REC S-VHS ET HDD S-VHS REW FEW VIDEO (M) L ­ AUDIO ­ R ­ + OK MENU NAVI yyy ;;; yyy ;;; ;;; yyy ;;; yyy S-VIDEO CH A. DUB PAUSE F-1 INSTRUCTIONS For Customer Use: Enter below the Model No. which are located on the rear of cabinet. Retain this information for future reference. [. . . ] Make sure "SUPERIMPOSE" is set to "ON" ( pg. Press OSD to change to the COUNT display if "REMAIN" is displayed. 1 2 1 4 7 < 2 5 8 0 3 6 9 > 3 4 C. RESET 1 2 OSD Display Tape Remaining Time (VHS deck only) ­ + 1 2 DISPLAY COUNTER INFORMATION Press OSD. All indications corresponding to the recorder's current status are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. DISPLAY TAPE REMAINING TIME Press OSD repeatedly until "REMAIN" appears on screen. The approximate tape remaining time appears on the TV screen and also on the recorder display panel " indicator. with a " The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate. Press OSD to change the on-screen display from "REMAIN" to "COUNT" and vice versa; and to show counter reading, channel number, clock time or tape remaining time on the front display panel. Then channel number will not be displayed when the recorder is playing a tape. Record One Program While Watching Another 1 2 ENGAGE TV MODE During recording. . . Change the TV's input mode from AV to TV. 3 EXIT THE DISPLAY Press OSD again. NOTES: SELECT CHANNEL FOR VIEWING Use the TV's channel selector to set the channel you want to watch. "SUPERIMPOSE" must be set to "ON", or the on-screen display will not appear ( pg. Near the beginning of the tape, the tape remaining estimate may be inaccurate. However, the estimate becomes more accurate as the tape comes closer to the end. Depending on the type of tape used, the tape remaining time reading may not appear right away, or may not be correct. "- -:- -" may sometimes appear, or the display may blink on occasion. The tape remaining time indication is not accurate when using VHS-C tapes with VHS-C adapter. 50 EN RECORDING FEATURES for VHS deck (cont. ) S-VHS (Super VHS), S-VHS ET and VHS Your recorder can record in S-VHS, S-VHS ET or VHS. S-VHS allows you to make high quality video recordings with a horizontal resolution of 400 lines. This compares with the 240 lines of resolution of normal VHS recordings. To achieve the highest quality picture we recommend that you record in S-VHS mode. By using S-VHS ET it is possible to record and play back with SVHS picture quality on VHS cassettes with this recorder. For details, refer to the next page. 1 2 ACCESS MAIN MENU SCREEN Press MENU. ACCESS VHS SET UP 2 SCREEN 1) At the top of the Main HDD/VHS SET UP FUNCTION SET UP INITIAL SET UP HDD SET UP VHS SET UP 1 VHS SET UP 2 Menu screen, move S-VHS MODE ON the arrow to "HDD/ AUTO SP=EP TIMER OFF VHS SET UP" by pressing @# (or 23), then press fi (or ) or OK. SELECT WITH [523] 2) On the HDD/VHS Set SELECT OK END THEN PRESS [OK] Up screen, move the arrow to "VHS SET UP 2" by pressing @# (or 23), then press fi (or ) or OK. INDEX MENU EN U POWER M yyy ;;; yyy ;;; REC LINK EJECT DIGITPURE TECHNOLOGY HM-HDS1 STOP PLAY PAUSE REC S-VHS ET HDD MENU NAVI S-VHS REW FEW VIDEO (M) L ­ AUDIO ­ R yy ;; yy ;; yy ;; OK CH S-VIDEO A. DUB PAUSE F-1 3 7 < SELECT S-VHS MODE 1) On the VHS Set Up 2 screen, move the arrow to "S-VHS MODE" by pressing %fi (or 5), then press OK. [. . . ] All products and parts thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered on an in-home basis. WHAT YOU MUST DO FOR WARRANTY SERVICE: Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service center, please call toll free: (800) 252-5722. If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which will be given to you by the toll-free number. [. . . ]