User manual JVC HM-HDS4

[. . . ] ATTENTION ! Check all accessories listed on page 101. HDD & S-VHS VIDEO RECORDER HM-HDS4EK INSTRUCTIONS LPT0737-001A EN 2 SAFETY FIRST The STANDBY/ON 1 button does not completely shut off mains power from the unit, but switches operating current on and off. "`" shows electrical power standby and "!" shows ON. Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder. [. . . ] 56) "Modify Information" ( pg. 58) "Delete Programme Information" ( "Divide Programme (available only for HDD Navigation)" pg. 60) "Play List Features" ( pg. 63) "Easy Dubbing from HDD deck to VHS deck" ( pg. 74) "Audio Dubbing" ( The limitations of registration You can register information up to 100 programmes in HDD Navigation. In VCR Navigation, you can register information up to 2000 programmes or up to 680 cassettes. To register the information for VCR Navigation, you need to record a programme for more than 5 minutes in SP mode (for more than 15 minutes in LP mode. When the amount of information is at the limits of registration, you cannot record new programme any more. need to delete old programmes to register new one ( 56 EDITING (cont. ) Modify Information NOTE: The Navigation systems cannot work during recording on the pg. HDD deck or in SAT# mode ( C Access the Navigation screen. Press EDIT. The Navigation screen corresponding to the selected deck appears. 79), the When "NAVIGATION" is set to "OFF" ( Navigation screen does not appear. A Press w e to move the arrow to "MODIFY" under "REC LIST", then press OK. B Press w r e t to move the arrow to the desired programme index, then press OK. A Press w e to move the arrow to "MODIFY" under "PROGRAMME", then press OK. B Press w r e t to move the arrow to the desired cassette index, then press OK. C Press w r e t to move the arrow to the desired programme index, then press OK. For the VHS deck: D Select the programme. E Access the modify screen. F Register new index. Press w e to move the arrow to "INDEX", then press OK. A Confirm the arrow is on "REPLACE". Playback starts in the left large window. B Search for the needed programme picture by pressing the appropriate buttons (4, 9, 3, or 5). You can also search for the picture by turning and pressing the JOG dial. New index appears in the right window. When you press OK with the arrow on "RETURN" you can return to the previous screen. While your are editing a programme in DV mode, the distortion of the picture on the small window (showing the result of the edition) does not affect the actual edited picture. Modify Index G Return to the normal screen. Press EDIT. For the VHS deck: Press 8 to cancel pause mode after pressing EDIT. A Turn on the recorder. Press 1. B Select the deck. Slide TV/CABLE/SAT to the right, then press HDD or S-VHS. For the VHS deck: Insert a cassette with the record safety tab intact. 57 Modify Category Perform steps A to D of "Modify Index" ( continuing. 56) before Press w r e t to move the arrow to "SAVE", then press OK. C Register new title. Press EDIT. Press w e to move the arrow to "CATEGORY", then press OK. A Access the modify screen. [. . . ] 40 Instant Timer Recording (ITR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33, 42 V Variable Speed Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30, 39 VIDEO PLUS+ System Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 VIDEO PLUS+ Timer Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]