User manual JVC HR-DVS1

[. . . ] CONTENTS Mini DV/S-VHS VIDEO CASSETTE RECORDER SAFETY FIRST QUICK SET UP GUIDE 2 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Some Do's And Don'ts . . . . . . . . . . . . . . . . . . . . . 5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AUTO SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] C If Another Recorder Is Compatible With The Y/C Signal . . . connect your recorder's AV1 IN/OUT connector to another recorder. When using your recorder as the recording deck, set "AV1 SELECT" to "S-VIDEO" and "AV2 SELECT" to "AV2" ( pg. When using your recorder as the source player, set the AV1 OUT switch on the rear panel to Y/C ( pg. 6). 1 4 7 T 2 5 8 0 W 3 2 6 9 4 NUMBER "0" TV PROG 1 DV VHS DV VHS 2 3 4 5 6 SELECT DECK Press VHS or DV. When using your recorder as the source player, set "S-VHS/AUDIO OUT" to "VHS" or "DV", depending on the deck being selected ( pg. 48). SET RECORDING DECK'S INPUT MODE Set to AUX. With this video recorder, press NUMBER key "0" and/or TV PROG to select "L-1" for the AV1 IN/ OUT connector, or "L-2" for the AV2 IN/DECODER connector, depending on the connector being used. When using the AV2 IN/DECODER connector, set "AV2 SELECT" to the appropriate mode. 48) 3 SET EDIT MODE (VHS DECK ONLY) See "Picture Control" on page 33. START SOURCE PLAYER Engage its Play mode. START RECORDING DECK Engage its Record mode. 43 A TV Receiver (AV mode) B Player Your recorder Recorder Your recorder TV Receiver (AV mode) 21-pin SCART Cable (provided) 21-pin SCART Cable (not provided) Another recorder Recorder C TV Receiver (AV mode) 21-pin SCART Cable (provided) 21-pin SCART Cable (not provided) Another recorder Player Recorder Your recorder S-Video Cable (not provided) 21-pin SCART Cable (provided) 21-pin SCART Cable (not provided) Another recorder Player NOTES: All necessary cables can be obtained from your dealer. For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B. E. S. T. is set to OFF) after you finish dubbing the tapes. When you use this recorder as the player for editing, be sure to set "O. S. D. " to "OFF" before starting ( pg. If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this recorder's S-VIDEO IN/S OUT and AUDIO IN/OUT connectors. When Using Your Video Recorder As The Source Player . . . connect its rear panel S OUT and AUDIO OUT connectors to the recording deck's S-Video and Audio input connectors. When Using Your Video Recorder As The Recording Deck . . . connect its front panel S-VIDEO and AUDIO input connectors to the source player's S-Video and Audio output connectors. Then, set the recorder's input mode to "L-3" and set "L-3 AV" to "S-VIDEO" ( pg. 41). 44 ADVANCED OPERATIONS (cont. ) VHS Audio Dubbing Audio dubbing replaces the normal audio sound of a previously recorded tape with a new soundtrack. Normal audio track Pre-recorded tape Audio Dubbing Video/Hi-Fi audio track A. CD Player etc. B U D Audio-dubbed tape DV Audio Dubbing This function lets you record new audio, without erasing the original audio, on a DV tape that was recorded with "SOUND MODE" set to "32kHz" ( pg. [. . . ] DAILY Button enables timer recording of daily serials. 19, 21 WEEKLY Button enables timer recording of weekly serials. 19, 21 Button engages timer-standby mode. 19, 21 AUX Button selects recorder's auxiliary input mode. [. . . ]