User manual JVC HR-J456

[. . . ] VIDEO CASSETTE RECORDER CONTENTS SAFETY FIRST 2 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . 2 Some Do's And Don'ts . . . . . . . . . . . . . . . 3 HR-J465EK HR-J265EK HR-J260EK HR-J265ES TV TV/VCR AUDIO ­ ­:­ ­ QUICK SET UP GUIDE CHECK THE CONTENTS . . . . . . . . . . . 4 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 11) 7­ Tape position indicator ( pg. 8) 8­ Current day/month/year 9­ Clock display 10­ Preset position number and station name/Aux. indicator (L-1, L-2 or F-1) 11­ Timer warning display ( pg. 13, 15) 12­ Cassette loaded mark 10 9 8 PR. 1 BBC 1 SP 21 : 00 NTSC=PAL 24. 98 ­ WARNING­ TIMER RECORDING TO START SOON [] 0 ¶8 2 3 7 + + + + ­1 : 23 : 45 REMAIN 1 : 00 4 5 6 26 Auto SPLP Timer If, when timer-recording in SP mode, there is not enough tape to record the entire programme, the recorder automatically switches to LP mode to allow complete recording. Recording a programme of 210 minutes in length onto a 180minute tape Approximately 150 minutes SP mode Total 210 minutes Approximately 60 minutes LP mode ADVANCED OPERATIONS (cont. ) Auto Timer When the Auto Timer is set to ON the timer is automatically engaged when the recorder power is turned off and automatically disengaged when the recorder is powered back on. Make sure you set "AUTO SPLP TIMER" to "ON" at the Mode Set screen before the timer-recording starts. 1 2 3 ACCESS MAIN MENU SCREEN Press MENU. 1 2 3 4 ACCESS MAIN MENU SCREEN Press MENU. ACCESS MODE SET SCREEN Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or #. MAIN MENU MODE SET AUTO CH SET MANUAL CH SET INITIAL SET ACCESS MODE SET SCREEN SELECT MODE Press %fi to move the highlight bar (pointer) to "AUTO SPLP TIMER", then press OK or # to select "ON". [5] = [MENU] : EXIT SELECT MODE Press OK or # to select either "ON" or "OFF". MODE SET B. AUTO SP=LP TIMER ON AUTO OFF ON ON Press %fi to move the highlight bar (pointer) to "MODE SET", then press OK or #. MODE SET B. AUTO SP=LP TIMER ON AUTO OFF ON ON [5] = [MENU] : EXIT [5] = [MENU] : EXIT RETURN TO NORMAL SCREEN Press MENU. 4 q q RETURN TO NORMAL SCREEN Press MENU. NOTE: For safety, when Auto timer is set to "OFF", all other recorder functions are disabled while the Timer mode is engaged. To disengage the timer, press (TIMER). NOTES: The Auto SPLP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly with any tapes longer than E-180 or with some tapes of shorter lengths. If you have programmed the recorder to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set "AUTO SPLP TIMER" to "ON". In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming. In order to ensure that the recording fits on the tape, this feature may leave a short non-recorded section at the end of the tape. There may be some picture noise and sound disturbance at the point on the tape where the recorder switches from SP to LP mode. If you perform timer recording with both PDC and the Auto SPLP Timer activated, and the programme goes beyond its originally scheduled length, there may be times when the programme cannot be recorded in its entirety. q q q 27 Repeat Playback Your video recorder can automatically play back the whole tape 50 times repeatedly. 1 4 7 2 5 8 0 3 2 6 9 4 1 FF START PLAYBACK Press PLAY. 1 ? 2 3 ACTIVATE REPEAT PLAYBACK Press PLAY and hold for over 5 seconds, then release. q q PL AY REW PAUSE 3 The Play indicator ( ) on the display panel blinks slowly. The tape plays 50 times automatically, and then stops. STOP PLAYBACK Press STOP at any time to stop playback. ST O P NOTE: Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback. NTSC Playback Your video recorder is equipped with NTSC circuitry that can play back NTSC tapes. 1 2 Next Function Memory The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode. a­ For Automatic Start Of Playback After Tape Rewind . press REW, then press PLAY within 2 seconds. b­ For Automatic Power Off After Tape Rewind . c­ For Automatic Timer Standby After Tape Rewind . press REW, then press (TIMER) within 2 seconds. LOAD A CASSETTE Insert a cassette recorded in NTSC. START PLAYBACK Press PLAY. q q q q q q "NTSCPAL" appears on the screen for about 5 seconds. Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. [. . . ] Display (­ ­:­ ­) Button -- same as button on recorder. 11 DAILY Button enables timer recording of daily serials. 13, 15 TV + 45 ) WEEKLY Button enables timer recording of weekly serials. 13, 15 q AUX Button selects recorder's auxiliary input mode. [. . . ]