User manual JVC HR-J768

[. . . ] 5 AUTO SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BASIC OPERATIONS 8 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 VIDEO Plus+ Timer Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To correct this you can override the automatic control and adjust the tracking manually by pressing the TV PROG buttons. 1 2 3 OVERRIDE AUTOMATIC TRACKING Press on the remote to engage manual tracking. ADJUST TRACKING MANUALLY Press TV PROG + or ­ to adjust tracking. RETURN TO AUTOMATIC TRACKING Press tracking. on the remote to re-engage automatic M EN U 3 OK SELECT PICTURE CONTROL SET MODE Move the highlighted bar MODE SET (pointer) to "PICTURE B. ON CONTROL" by pressing PICTURE CONTROL AUTO %fi, then press OK or # to AUTO TIMER OFF O. AUTO SP=LP TIMER OFF AUTO: Provides optimised picture benefits of B. E. S. T. EDIT: Minimizes picture degradation during editing (recording and playback). SOFT: Reduces image coarseness when viewing overplayed tapes containing a lot of noise. SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons. NOTES: q q When you select EDIT, SHARP or SOFT, the selected mode will not change until you select again. When you select EDIT to dub tapes, be sure to select AUTO after you finish dubbing the tapes. 4 q q RETURN TO NORMAL SCREEN Press MENU. NOTES: When B. E. S. T. is OFF, "PICTURE CONTROL" switches automatically from AUTO to NORM. Refer to page 22. NOTE: When a new tape is inserted, the recorder returns to the automatic tracking mode automatically. 25 Other Functions Turn on the TV and select the VIDEO channel (or AV mode). On-Screen Display You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF. 1 2 ACCESS MAIN MENU SCREEN Press MENU. ACCESS MODE SET SCREEN Move the highlight bar (pointer) to "MODE SET" by pressing %fi, then press OK or #. 1 4 7 2 5 8 0 3 2 6 9 4 3 OK ENABLE/DISABLE ON-SCREEN DISPLAY The default setting is "ON", so if you want onscreen displays, leave the setting as it is and go to step 4. If you don't want the displays to appear, press %fi to move the highlight bar (pointer) to "O. S. D. " and press OK or # to set "O. S. D. " to "OFF". MODE SET B. c­ For Automatic Timer Standby After Tape Rewind . press REW, then press (TIMER) within 2 seconds. LOAD A CASSETTE Insert a cassette recorded in NTSC. START PLAYBACK Press PLAY. q q q q q q "NTSCPAL" appears on the screen for about 5 seconds. Some TVs shrink the picture vertically and place black bars at the top and bottom of the screen. This is not a malfunction on the part of either the video recorder or the TV. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control. ) The counter and tape remaining time readings will be incorrect. During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour. Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback. 28 SUBSIDIARY SETTINGS IMPORTANT Perform the following steps only if -- -- Video Channel Set has not been done correctly by the Auto Set Up function ( pg. -- interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area. -- you change the connection between your recorder and TV from RF connection to AV connection, or vice versa. Video Channel Set Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. DISPLAY STANDBY/ON TIMER REC LINK TV PROG you have connected the video recorder to your TV via both an RF cable and a 21-pin SCART cable (AV connection), you do not need the video channel so you have to set the video channel to off. -- Go to "With AV Connection" below. [. . . ] "Operating JVC TVs" on page 45. STANDBY/ON Button -- same as button on recorder. (TV Muting) Button mutes sound of connected JVC TV. "Operating JVC TVs" on page 45. [. . . ]