User manual JVC HR-S6700EU

[. . . ] ENGLISH CONTENTS SAFETY FIRST INDEX INSTALLING YOUR NEW RECORDER 2 4 8 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 VIDEO CASSETTE RECORDER Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 S-VIDEO Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 INITIAL SETTINGS 10 Auto Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When the Automatic Satellite Programme Recording mode is engaged, or the recorder's power is turned off after Automatic Satellite Programme Recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON". After Automatic Satellite Programme Recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function ( pg. 20). EDITING EN 35 Edit From A Camcorder A If the camcorder has no S-VIDEO output connector . . . Your recorder You can use a camcorder as the source player and your recorder as the recorder. A Make connections. A If the camcorder has no S-VIDEO output connector . . . connect the camcorder's AUDIO OUT and VIDEO OUT connectors to the recorder's front panel AUDIO and VIDEO input connectors. B If the camcorder has an S-VIDEO output connector . . . connect the camcorder's AUDIO OUT and S-VIDEO OUT connectors to the recorder's front panel AUDIO and S-VIDEO input connectors. When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. AUDIO input VIDEO input Audio cable (not provided) Video cable (not provided) VIDEO OUT Press AUX (NUMBER key "0") and/or PR to select "F-1" for the AUDIO and VIDEO input connectors, or "S-1" for the AUDIO and S-VIDEO input connectors, depending on the connectors being used. B Set the recorder's input mode. C Set the edit mode. See "PICTURE CONTROL" on page 45. Camcorder D Start the camcorder. AUDIO OUT Engage the Play mode of the camcorder. Player E Start the recorder. NOTES: Your recorder Engage the Record mode of the recorder. B If the camcorder has an S-VIDEO output connector . . . All necessary cables can be obtained from your dealer. When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B. E. S. T. " is set to "OFF") after you finish dubbing the tapes. S-VIDEO input AUDIO input Audio cable (not provided) S-Video cable (not provided) S-VIDEO OUT Camcorder AUDIO OUT Player 36 EN EDITING (cont. ) Output/Input Set L-1 OUTPUT and L-1 INPUT Setting Set "L-1 OUTPUT" and "L-1 INPUT" to the appropriate mode depending on the type of appliance connected to the recorder's AV1 (L-1) IN/OUT connector. A Access the Main Menu screen. Press MENU. B Access the Output/Input Set screen. Press rt to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or e. the output or input C SelectIN/OUT connector. mode for the AV1 (L-1) Press rt to move the highlight bar (pointer) to "L-1 OUTPUT" or "L-1 INPUT". Then, press OK or e to select the appropriate setting. * The default setting is bold in the table below. 8 L-1 OUTPUT VIDEO: S-VIDEO: If a connected appliance's input is compatible only with regular video signals, set to "VIDEO". If a connected appliance's input is compatible with Y/C signals, set to "S-VIDEO". You can obtain highquality S-VHS picture. If a connected appliance's output is compatible only with regular video signals, set to "VIDEO". If a connected appliance's output is compatible with Y/C signals, set to "S-VIDEO". You can obtain highquality S-VHS picture. 8 L-1 INPUT VIDEO: S-VIDEO: D Return to the normal screen. Press MENU. NOTES: If "L-1 OUTPUT" is set to "S-VIDEO", it is impossible to set "L-1 INPUT" to "S-VIDEO". If "L-2 SELECT" is set to "DECODER", it is impossible to set "L-1 INPUT" to "S-VIDEO". EN 37 L-2 SELECT and L-2 INPUT Setting Set "L-2 SELECT" to the appropriate mode depending on the type of appliance connected to the recorder's AV2 (L-2) IN/ DECODER connector. Set "L-2 INPUT" to the appropriate mode depending on the output signals of the connected appliance. Perform steps 1 and 2 of "L-1 OUTPUT and L-1 INPUT Setting" on page 36. NOTES: input mode A Select the connector. for the AV2 (L-2) IN/ DECODER Press rt to move the highlight bar (pointer) to "L-2 SELECT" or "L-2 INPUT". Then, press OK or e to select the appropriate setting. * The default setting is bold in the table below. If you have a satellite receiver or a decoder connected to the AV2 (L-2) IN/DECODER connector, be sure to set "L-2 SELECT" back to appropriate mode after editing. If you are not connecting a satellite receiver or a decoder to the AV2 (L-2) IN/DECODER connector, leave "L-2 SELECT" set to "A/V". The default setting is "A/V"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "A/V" will be automatically selected when the power is restored to the recorder. [. . . ] 37 L-2 SELECT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 V Variable Speed Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Video Channel Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]