User manual JVC HR-S6722

[. . . ] CONTENTS VIDEO CASSETTE RECORDER SAFETY FIRST 2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Some Do's And Don'ts . . . . . . . . . . . . . . . . . . . . . 4 HR-S6722EK QUICK SET UP GUIDE 5 CHECK THE CONTENTS . . . . . . . . . . . . . . . . . . 5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The button lights up and the recorder turns off automatically. To disengage the Auto Satellite Prog Rec mode, press SAT. If the recorder's power is off, it is not possible to engage the Auto Satellite Prog Rec mode. NOTES: Auto Satellite Prog recording is possible with the AV2 (L-2) IN/DECODER connector only. When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON". After Auto Satellite Prog recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function ( pg. For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver. Auto Satellite Prog recording is not possible if your satellite receiver does not have a timer. The SAT button blinks while Auto Satellite Prog recording is in progress. Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengages the Auto Satellite Prog Rec mode. If there is more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set a different tape speed for each; the tape speed selected in step 4 will apply to all the programmes for Auto Satellite Prog recording. 28) does not work while Auto Satellite Prog recording is in progress. 42) does not work when the Auto Satellite Prog Rec mode is engaged. Depending on the type of satellite receiver, the recorder may not record a short portion at the beginning of the programme or may record slightly longer than the actual length of the programme. If you engage the Auto Satellite Prog Rec mode when the satellite receiver's power is on, the recorder will not start Auto Satellite Prog recording even though the SAT button blinks. When the satellite receiver shuts off once and is turned back on again, the recorder starts recording. You can also record a programme from your cable system in the same way if the system has a timer and is connected to the recorder's AV2 (L-2) IN/DECODER connector. 32 ADVANCED OPERATIONS (cont. ) Picture Control This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO. " Minimizing Picture Degradation While Editing Turn on the TV and select the VIDEO channel (or AV mode). 1 2 3 ACCESS MAIN MENU SCREEN Press MENU. ACCESS MODE SET SCREEN Move the highlighted bar (pointer) to "MODE SET" by pressing %fi, then press OK or #. SELECT PICTURE CONTROL SET MODE Move the highlighted bar MODE SET (pointer) to "PICTURE B. ON CONTROL" by pressing PICTURE CONTROL AUTO AUTO TIMER OFF %fi, then press OK or # to O. DIRECT REC ON AUTO SP=LP TIMER OFF AUTO: Provides POWER SAVE OFF optimised picture NEXT PAGE benefits of B. E. S. T. EDIT: Minimizes picture degradation during editing (recording and playback). SOFT: Reduces image coarseness when viewing overplayed tapes containing a lot of noise. SHARP: Clearer, sharper-edged picture when viewing images with lots of flat, same-coloured surfaces such as cartoons. ­ ­:­ ­ 1 4 7 2 5 8 0 3 2 6 9 4 1 ? MENU 3 OK NOTES: q q When you select "EDIT", "SOFT" or "SHARP", the selected mode will not change until you select again. [. . . ] 19, 21 q AUX Button selects recorder's auxiliary input pg. w (TIMER) Button engages timer-standby mode. 19, 21 e DATE +/­ Button inputs date of programme for timer recording. 20 r PR +/­ Button -- same as button on recorder. [. . . ]