User manual JVC HR-S9500EK

[. . . ] VIDEO CASSETTE RECORDER CONTENTS SAFETY FIRST QUICK SET UP GUIDE 2 5 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Some Do's And Don'ts . . . . . . . . . . . . . . . . . . . . . 5 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 AUTO SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing. From S-VHS to S-VHS: All signals will be transferred with minimum degradation. 33 Edit From A Camcorder 1 4 7 2 5 8 0 3 2 You can use a camcorder as the source player and your video recorder as the recorder. 1 MAKE CONNECTIONS A If the camcorder has no S-VIDEO output connector. . . connect the camcorder's AUDIO/VIDEO OUT connectors to the recorder's front panel AUDIO/ VIDEO input connectors. B If the camcorder has an S-VIDEO output connector. . . connect the camcorder's S-VIDEO OUT and AUDIO OUT connectors to the recorder's front panel S-VIDEO and AUDIO input connectors. When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder. When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling the recorder. Refer to the camcorder's instruction manual for operating procedure. 6 9 4 NUMBER "0" TV PROG 2 3 4 5 SET RECORDER'S INPUT MODE Press NUMBER key "0" and/or TV PROG to select "F-1" for the AUDIO/VIDEO input connectors, or "S-1" for the AUDIO/S-VIDEO input connectors, depending on the connectors being used. 1 SET EDIT MODE See "Editing Mode Setting" on page 32. START CAMCORDER Engage its Play mode. NOTES: All necessary cables can be obtained from your dealer. You can also use another video recorder as the player instead of a camcorder. START RECORDER Engage its Record mode. A If the camcorder has no S-VIDEO output connector. . . Recorder B If the camcorder has an S-VIDEO output connector. . . Recorder VIDEO input AUDIO input To rear panel PAUSE/ R. A. EDIT connector S-VIDEO input AUDIO input To rear panel PAUSE/ R. A. EDIT connector Audio/Video Cable (not provided) VIDEO OUT Audio Cable (not provided) Mini-Plug Cable (not provided) (JVC camcorder only) S-Video Cable (provided) S-VIDEO OUT Mini-Plug Cable (not provided) (JVC camcorder only) Camcorder AUDIO OUT EDIT Camcorder AUDIO OUT EDIT Player Player 34 ADVANCED OPERATIONS (cont. ) You can use your video recorder as the source player or as the recording deck. Edit To Or From Another 1 Video Recorder MAKE CONNECTIONS Connect the player's 21-pin SCART connector to the recorder's 21-pin SCART connector as illustrated on page 35. A When Using Your Video Recorder As The Source Player . . . connect its AV1 IN/OUT connector to the recording deck. B When Using Your Video Recorder As The Recording Deck . . . connect its AV2 IN or AV1 IN/OUT connector to the source player. 1 4 7 2 5 8 0 3 2 2 4 SET RECORDING DECK'S INPUT MODE Set to AUX. With this video recorder, press NUMBER key "0" and/or TV PROG to select "L-1" for the AV1 IN/ OUT connector, or "L-2" for the AV2 IN connector, depending on the connector being used. When using the AV2 IN connector, set "AV2 SELECT" to the appropriate mode. 35 6 9 NUMBER "0" TV PROG 1 3 3 4 5 SET EDIT MODE See "Editing Mode Setting" on page 32. START SOURCE PLAYER Engage its Play mode. START RECORDING DECK Engage its Record mode. NOTES: All necessary cables can be obtained from your dealer. For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal. When you use this recorder as the player for editing, be sure to set "O. S. D. " to "OFF" before starting ( pg. [. . . ] Point the remote control toward the sensor window. The maximum operating distance of the remote control is about 8 m. w DAILY Button enables timer recording of daily serials. 15, 17 e WEEKLY Button enables timer recording of weekly serials. 15, 17 r AUX Button selects recorder's auxiliary input mode. [. . . ]