User manual JVC HR-XV1EK

[. . . ] DVD PLAYER Hi-Fi VIDEO CASSETTE RECORDER USER'S GUIDE For model: HR-XV1EK DIGITAL VIDEO LPT0716-001A Safety Precautions SAFETY FIRST The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. IMPORTANT Please read the various precautions on page 2 and 3 before installing or operating the recorder. It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein. CAUTION When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet. Refer internal servicing to qualified service personnel. [. . . ] In this case, you have to set the timer again. If you want to set the timer with the PDC function, see "To record with the PDC system" on page 28. In case of an error, press L to go back to the previous step and repeat. 29 Timer Recording Manually accept them. 5 Press OK to programmes, To enter other repeat steps 2 to 4, or press SET UP MENU repeatedly until the TV picture appears. 23 FRI 19:30 21:30 : : : : : : : : : : : : : : 3 LP SELECT : / OK : MENU EXIT Note: In case of a timer recording from the Scart socket, proceed as follows: When "CH" is blinking in picture/step 4, press or repeatedly until "AV" appears. If the clock symbol blinks when the timer recording is completed, the TV programme has not been completely recorded because of an insufficient tape supply. As long as the timer is activated (clock symbol indicated on the display), you cannot use the DVD/VCR. If you want to use the DVD/VCR, press to deactivate the timer. is ready for 6 Although the data is stored in the timer, it notturn it on. To start timer recording, press When no video cassette is loaded, the clock symbol does not appear. When you turn the unit off, the timer will be switched on automatically. The clock symbol will appear on the display. If you still want to use the recorder, press first. Then the clock symbol will disappear from the display. Weekly (e. g. MON-SAT Monday to Saturday) Timer recording Follow the procedure for timer recording on the previous page. In picture/step 3 (when date and day is blinking), press repeatedly until the desired setting appears (weekly or daily). DATE-DAY SUN-SAT M WKL-FRI MON-SAT WKL-SAT MON-FRI WKL-SUN WKL-WED WKL-MON WKL-TUE WKL-THU Set other START, END, CH, SPEED as previous pages. In case of overlapping Timer programmes Do not overlap timer programmes as portions of the conflicting programmes will be lost. The first recording time has priority over the next recording time as shown in the diagram below. 8 : 00 9 : 00 10 : 00 11 : 00 Program 1 Program 2 Deleted Parts Program 3 Non Recorded Portion Parts Note: The daily/weekly recording can be made continuously until the recording is cancelled or the tape reaches the end. During timer recording, the automatic rewinding mechanism does not function. Recording Control Settings Prog. 1 Prog. 2 Prog. 3 30 Timer Recording Manually Confirmation/Cancellation of the Timer Recording If the Timer has been now press to 1 vate the timer. Thendeactisymbol press VCR to change to VCR mode. To confirm a 2 Press PROG. Timer programme. All the timer programmes will appear. 28 FRI 30 SUN 30 SUN 19:30 21:00 12:15 13:00 19:00 22:00 : : : : : : : : : : 3 LP 1 SP 3 LP SELECT : / OK CLEAR : CANCEL EXIT : MENU 3 To cancel a Timer programme. Press L or M to select the timer programme you wish to cancel. This line is now cancelled. 28 FRI 30 SUN 19:30 21:00 12:15 13:00 3 LP 1 SP : : : : : : SELECT : / OK EXIT : MENU : : : : : : MENU (or 4 Press SET UP appears. PROG. ) button repeatedly until the TV picture 31 NICAM Stereo Recording and Playback This DVD/VCR is capable of recording sound in Hi-Fi system. The recording will be performed automatically. NICAM STEREO broadcasts are recorded in its original sound system regardless of the setting. If you wish to record NICAM programmes, select NICAM "AUTO" as follows. [. . . ] The recording start/end time is not set correctly. The has not been pressed ( is not lit). Tracking adjustment beyond range of automatic tracking circuit. The tape is worn or damaged. 18 15 29 30 20 59 Timer recording does not work. Noise bars on screen. DVD Display is not shown in your language. [. . . ]